lkml.org 
[lkml]   [2022]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 7/7] usb: typec: tcpci_rt1711h: Fix CC PHY noise filter of voltage level
On Mon, Aug 01, 2022 at 06:14:47PM +0800, Gene Chen wrote:
> From: Gene Chen <gene_chen@richtek.com>
>
> Fix CC PHY noise filter of voltage level according to
> current cc voltage level
>
> Signed-off-by: Gene Chen <gene_chen@richtek.com>

I was unable to apply this series on top of Greg's latest usb-next, so
I think you need to rebase these. But in any case, for this patch FWIW:

Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>

> ---
> drivers/usb/typec/tcpm/tcpci_rt1711h.c | 58 +++++++++++++++++++++++++-
> 1 file changed, 57 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/typec/tcpm/tcpci_rt1711h.c b/drivers/usb/typec/tcpm/tcpci_rt1711h.c
> index da35dd3e8a59..6d2568de553b 100644
> --- a/drivers/usb/typec/tcpm/tcpci_rt1711h.c
> +++ b/drivers/usb/typec/tcpm/tcpci_rt1711h.c
> @@ -25,8 +25,11 @@
> #define RT1711H_PHYCTRL1 0x80
> #define RT1711H_PHYCTRL2 0x81
>
> -#define RT1711H_RTCTRL8 0x9B
> +#define RT1711H_RTCTRL4 0x93
> +/* rx threshold of rd/rp: 1b0 for level 0.4V/0.7V, 1b1 for 0.35V/0.75V */
> +#define RT1711H_BMCIO_RXDZSEL BIT(0)
>
> +#define RT1711H_RTCTRL8 0x9B
> /* Autoidle timeout = (tout * 2 + 1) * 6.4ms */
> #define RT1711H_RTCTRL8_SET(ck300, ship_off, auto_idle, tout) \
> (((ck300) << 7) | ((ship_off) << 5) | \
> @@ -45,6 +48,10 @@
> #define RT1711H_RTCTRL15 0xA2
> #define RT1711H_RTCTRL16 0xA3
>
> +#define RT1711H_RTCTRL18 0xAF
> +/* 1b0 as fixed rx threshold of rd/rp 0.55V, 1b1 depends on RTCRTL4[0] */
> +#define BMCIO_RXDZEN BIT(0)
> +
> struct rt1711h_chip {
> struct tcpci_data data;
> struct tcpci *tcpci;
> @@ -165,6 +172,53 @@ static int rt1711h_set_vconn(struct tcpci *tcpci, struct tcpci_data *tdata,
> RT1711H_AUTOIDLEEN, enable ? 0 : RT1711H_AUTOIDLEEN);
> }
>
> +/*
> + * Selects the CC PHY noise filter voltage level according to the remote current
> + * CC voltage level.
> + *
> + * @status: The port's current cc status read from IC
> + * Return 0 if writes succeed; failure code otherwise
> + */
> +static inline int rt1711h_init_cc_params(struct rt1711h_chip *chip, u8 status)
> +{
> + int ret, cc1, cc2;
> + u8 role = 0;
> + u32 rxdz_en, rxdz_sel;
> +
> + ret = rt1711h_read8(chip, TCPC_ROLE_CTRL, &role);
> + if (ret < 0)
> + return ret;
> +
> + cc1 = tcpci_to_typec_cc((status >> TCPC_CC_STATUS_CC1_SHIFT) &
> + TCPC_CC_STATUS_CC1_MASK,
> + status & TCPC_CC_STATUS_TERM ||
> + tcpc_presenting_rd(role, CC1));
> + cc2 = tcpci_to_typec_cc((status >> TCPC_CC_STATUS_CC2_SHIFT) &
> + TCPC_CC_STATUS_CC2_MASK,
> + status & TCPC_CC_STATUS_TERM ||
> + tcpc_presenting_rd(role, CC2));
> +
> + if ((cc1 >= TYPEC_CC_RP_1_5 && cc2 < TYPEC_CC_RP_DEF) ||
> + (cc2 >= TYPEC_CC_RP_1_5 && cc1 < TYPEC_CC_RP_DEF)) {
> + rxdz_en = BMCIO_RXDZEN;
> + if (chip->did == RT1715_DID)
> + rxdz_sel = RT1711H_BMCIO_RXDZSEL;
> + else
> + rxdz_sel = 0;
> + } else {
> + rxdz_en = 0;
> + rxdz_sel = RT1711H_BMCIO_RXDZSEL;
> + }
> +
> + ret = regmap_update_bits(chip->data.regmap, RT1711H_RTCTRL18,
> + BMCIO_RXDZEN, rxdz_en);
> + if (ret < 0)
> + return ret;
> +
> + return regmap_update_bits(chip->data.regmap, RT1711H_RTCTRL4,
> + RT1711H_BMCIO_RXDZSEL, rxdz_sel);
> +}
> +
> static int rt1711h_start_drp_toggling(struct tcpci *tcpci,
> struct tcpci_data *tdata,
> enum typec_cc_status cc)
> @@ -225,6 +279,8 @@ static irqreturn_t rt1711h_irq(int irq, void *dev_id)
> /* Clear cc change event triggered by starting toggling */
> if (status & TCPC_CC_STATUS_TOGGLING)
> rt1711h_write8(chip, TCPC_ALERT, TCPC_ALERT_CC_STATUS);
> + else
> + rt1711h_init_cc_params(chip, status);
> }
>
> out:
> --
> 2.25.1

--
heikki

\
 
 \ /
  Last update: 2022-08-02 10:44    [W:0.144 / U:1.604 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site