Messages in this thread Patch in this message | | | From | Florian Fainelli <> | Subject | [PATCH] clk: iproc: Do not rely on node name for correct PLL setup | Date | Tue, 2 Aug 2022 19:58:34 -0700 |
| |
After commit 31fd9b79dc58 ("ARM: dts: BCM5301X: update CRU block description") a warning from clk-iproc-pll.c was generated due to a duplicate PLL name as well as the console stopped working. Upon closer inspection it became clear that iproc_pll_clk_setup() used the Device Tree node unit name as an unique identifier as well as a parent name to parent all clocks under the PLL.
BCM5301X was the first platform on which that got noticed because of the DT node unit name renaming but the same assumptions hold true for any user of the iproc_pll_clk_setup() function.
The first 'clock-output-names' property is always guaranteed to be unique as well as providing the actual desired PLL clock name, so we utilize that to register the PLL and as a parent name of all children clock.
Fixes: 5fe225c105fd ("clk: iproc: add initial common clock support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- Rafal,
This is a replacement for this patch that you checked into OpenWrt:
https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/bcm53xx/patches-5.15/320-ARM-dts-BCM5301X-Switch-back-to-old-clock-nodes-name.patch;h=cee37732ab9e2ac8bc2a399a53d01b9ead756cb8;hb=HEAD
drivers/clk/bcm/clk-iproc-pll.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/bcm/clk-iproc-pll.c b/drivers/clk/bcm/clk-iproc-pll.c index 33da30f99c79..92be88eb1d11 100644 --- a/drivers/clk/bcm/clk-iproc-pll.c +++ b/drivers/clk/bcm/clk-iproc-pll.c @@ -736,6 +736,7 @@ void iproc_pll_clk_setup(struct device_node *node, const char *parent_name; struct iproc_clk *iclk_array; struct clk_hw_onecell_data *clk_data; + const char *clk_name; if (WARN_ON(!pll_ctrl) || WARN_ON(!clk_ctrl)) return; @@ -783,7 +784,12 @@ void iproc_pll_clk_setup(struct device_node *node, iclk = &iclk_array[0]; iclk->pll = pll; - init.name = node->name; + ret = of_property_read_string_index(node, "clock-output-names", + 0, &clk_name); + if (WARN_ON(ret)) + goto err_pll_register; + + init.name = clk_name; init.ops = &iproc_pll_ops; init.flags = 0; parent_name = of_clk_get_parent_name(node, 0); @@ -803,13 +809,12 @@ void iproc_pll_clk_setup(struct device_node *node, goto err_pll_register; clk_data->hws[0] = &iclk->hw; + parent_name = clk_name; /* now initialize and register all leaf clocks */ for (i = 1; i < num_clks; i++) { - const char *clk_name; memset(&init, 0, sizeof(init)); - parent_name = node->name; ret = of_property_read_string_index(node, "clock-output-names", i, &clk_name); -- 2.25.1
| |