lkml.org 
[lkml]   [2022]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: marvell: Add UART1-3 for AC5/AC5X
Date
The AC5/AC5X SoC has 4 UART blocks. Add the additional UART1-3 blocks to
the base dtsi file.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---

Notes:
This applies on top of the series adding the AC5/AC5X SoC which is in
Gregory's mvebu/dt64 tree but hasn't made it to Linus's (yet).

arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi | 30 +++++++++++++++++++
1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
index 80b44c7df56a..914fcf9e2c24 100644
--- a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
@@ -95,6 +95,36 @@ uart0: serial@12000 {
status = "okay";
};

+ uart1: serial@12100 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x11000 0x100>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clocks = <&cnm_clock>;
+ status = "disabled";
+ };
+
+ uart2: serial@12200 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x12200 0x100>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clocks = <&cnm_clock>;
+ status = "disabled";
+ };
+
+ uart3: serial@12300 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x12300 0x100>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clocks = <&cnm_clock>;
+ status = "disabled";
+ };
+
mdio: mdio@22004 {
#address-cells = <1>;
#size-cells = <0>;
--
2.37.1
\
 
 \ /
  Last update: 2022-08-03 03:17    [W:0.154 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site