lkml.org 
[lkml]   [2022]   [Aug]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/7] phy: phy-mtk-tphy: disable gpio mode for all usb2 phys
Date
Disable DP/DM's GPIO mode for all usb2 phy, not only for the first
usb2 phy which usually supports dual-role mode.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
drivers/phy/mediatek/phy-mtk-tphy.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index 7f40b8b052bd..79920c066e59 100644
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -532,8 +532,7 @@ static void u2_phy_instance_init(struct mtk_tphy *tphy,
/* disable switch 100uA current to SSUSB */
mtk_phy_clear_bits(com + U3P_USBPHYACR5, PA5_RG_U2_HS_100U_U3_EN);

- if (!index)
- mtk_phy_clear_bits(com + U3P_U2PHYACR4, P2C_U2_GPIO_CTR_MSK);
+ mtk_phy_clear_bits(com + U3P_U2PHYACR4, P2C_U2_GPIO_CTR_MSK);

if (tphy->pdata->avoid_rx_sen_degradation) {
if (!index) {
--
2.25.1
\
 
 \ /
  Last update: 2022-08-19 11:16    [W:0.127 / U:0.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site