lkml.org 
[lkml]   [2022]   [Aug]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] dmaengine: dw-edma: Remove runtime PM support
On Thu, May 12, 2022 at 02:06:12PM +0530, Manivannan Sadhasivam wrote:
> Currently, the dw-edma driver enables the runtime_pm for parent device
> (chip->dev) and increments/decrements the refcount during alloc/free
> chan resources callbacks.
>
> This leads to a problem when the eDMA driver has been probed, but the
> channels were not used. This scenario can happen when the DW PCIe driver
> probes eDMA driver successfully, but the PCI EPF driver decides not to
> use eDMA channels and use iATU instead for PCI transfers.
>
> In this case, the underlying device would be runtime suspended due to
> pm_runtime_enable() in dw_edma_probe() and the PCI EPF driver would have
> no knowledge of it.
>
> Ideally, the eDMA driver should not be the one doing the runtime PM of
> the parent device. The responsibility should instead belong to the client
> drivers like PCI EPF.
>
> So let's remove the runtime PM support from eDMA driver.
>
> Cc: Serge Semin <fancer.lancer@gmail.com>
> Cc: Frank Li <Frank.Li@nxp.com>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Looks like this one missed 6.0. Vinod, can you please merge this now?

Thanks,
Mani

> ---
>
> Note: This patch is made on top of Frank and Serge's edma work, but should
> be applicable independently also.
>
> [PATCH v10 0/9] Enable designware PCI EP EDMA locally
> [PATCH v2 00/26] dmaengine: dw-edma: Add RP/EP local DMA controllers support
>
> drivers/dma/dw-edma/dw-edma-core.c | 12 ------------
> 1 file changed, 12 deletions(-)
>
> diff --git a/drivers/dma/dw-edma/dw-edma-core.c b/drivers/dma/dw-edma/dw-edma-core.c
> index 561686b51915..b2b5077d380b 100644
> --- a/drivers/dma/dw-edma/dw-edma-core.c
> +++ b/drivers/dma/dw-edma/dw-edma-core.c
> @@ -9,7 +9,6 @@
> #include <linux/module.h>
> #include <linux/device.h>
> #include <linux/kernel.h>
> -#include <linux/pm_runtime.h>
> #include <linux/dmaengine.h>
> #include <linux/err.h>
> #include <linux/interrupt.h>
> @@ -731,15 +730,12 @@ static int dw_edma_alloc_chan_resources(struct dma_chan *dchan)
> dchan->dev->chan_dma_dev = false;
> }
>
> - pm_runtime_get(chan->dw->chip->dev);
> -
> return 0;
> }
>
> static void dw_edma_free_chan_resources(struct dma_chan *dchan)
> {
> unsigned long timeout = jiffies + msecs_to_jiffies(5000);
> - struct dw_edma_chan *chan = dchan2dw_edma_chan(dchan);
> int ret;
>
> while (time_before(jiffies, timeout)) {
> @@ -752,8 +748,6 @@ static void dw_edma_free_chan_resources(struct dma_chan *dchan)
>
> cpu_relax();
> }
> -
> - pm_runtime_put(chan->dw->chip->dev);
> }
>
> static int dw_edma_channel_setup(struct dw_edma *dw, u32 wr_alloc, u32 rd_alloc)
> @@ -1010,9 +1004,6 @@ int dw_edma_probe(struct dw_edma_chip *chip)
> if (err)
> goto err_irq_free;
>
> - /* Power management */
> - pm_runtime_enable(dev);
> -
> /* Turn debugfs on */
> dw_edma_v0_core_debugfs_on(dw);
>
> @@ -1046,9 +1037,6 @@ int dw_edma_remove(struct dw_edma_chip *chip)
> for (i = (dw->nr_irqs - 1); i >= 0; i--)
> free_irq(chip->ops->irq_vector(dev, i), &dw->irq[i]);
>
> - /* Power management */
> - pm_runtime_disable(dev);
> -
> /* Deregister eDMA device */
> dma_async_device_unregister(&dw->dma);
> list_for_each_entry_safe(chan, _chan, &dw->dma.channels,
> --
> 2.25.1
>

--
மணிவண்ணன் சதாசிவம்

\
 
 \ /
  Last update: 2022-08-19 10:42    [W:2.249 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site