lkml.org 
[lkml]   [2022]   [Aug]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RESEND v2 2/2] usb: xhci-mtk: fix bandwidth release issue
Date
This happens when @udev->reset_resume is set to true, when usb resume,
the flow as below:
- hub_resume
- usb_disable_interface
- usb_disable_endpoint
- usb_hcd_disable_endpoint
- xhci_endpoint_disable // it set @ep->hcpriv to NULL

Then when reset usb device, it will drop allocated endpoints,
the flow as below:
- usb_reset_and_verify_device
- usb_hcd_alloc_bandwidth
- xhci_mtk_drop_ep

but @ep->hcpriv is already set to NULL, the bandwidth will be not
released anymore.

Due to the added endponts are stored in hash table, we can drop the check
of @ep->hcpriv.

Fixes: 4ce186665e7c ("usb: xhci-mtk: Do not use xhci's virt_dev in drop_endpoint")
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2: add comment
---
drivers/usb/host/xhci-mtk-sch.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c
index a17bc584ee99..579899eb24c1 100644
--- a/drivers/usb/host/xhci-mtk-sch.c
+++ b/drivers/usb/host/xhci-mtk-sch.c
@@ -764,8 +764,8 @@ int xhci_mtk_drop_ep(struct usb_hcd *hcd, struct usb_device *udev,
if (ret)
return ret;

- if (ep->hcpriv)
- drop_ep_quirk(hcd, udev, ep);
+ /* needn't check @ep->hcpriv, xhci_endpoint_disable set it NULL */
+ drop_ep_quirk(hcd, udev, ep);

return 0;
}
--
2.18.0
\
 
 \ /
  Last update: 2022-08-19 10:06    [W:0.064 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site