lkml.org 
[lkml]   [2022]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH devicetree 2/3] arm64: dts: ls1028a: mark enetc port 3 as a DSA master too
Am 2022-08-18 16:05, schrieb Vladimir Oltean:
> The LS1028A switch has 2 internal links to the ENETC controller.
>
> With DSA's ability to support multiple CPU ports, we should mark both
> ENETC ports as DSA masters.
>
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
> ---
> arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index 3da105119d82..455778936899 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -1170,6 +1170,7 @@ mscc_felix_port5: port@5 {
> reg = <5>;
> phy-mode = "internal";
> status = "disabled";
> + ethernet = <&enetc_port3>;

status should be the last property, no?

-michael

\
 
 \ /
  Last update: 2022-08-18 16:46    [W:0.081 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site