lkml.org 
[lkml]   [2022]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/4] ALSA: hda: Rework snd_hdac_stream_reset() to use macros
Date
We can use existing macros to poll and update register values instead of
open coding the functionality.

Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
---
sound/hda/hdac_stream.c | 26 ++++++--------------------
1 file changed, 6 insertions(+), 20 deletions(-)

diff --git a/sound/hda/hdac_stream.c b/sound/hda/hdac_stream.c
index f3582012d22f..bdf6d4db6769 100644
--- a/sound/hda/hdac_stream.c
+++ b/sound/hda/hdac_stream.c
@@ -165,7 +165,6 @@ EXPORT_SYMBOL_GPL(snd_hdac_stop_streams_and_chip);
void snd_hdac_stream_reset(struct hdac_stream *azx_dev)
{
unsigned char val;
- int timeout;
int dma_run_state;

snd_hdac_stream_clear(azx_dev);
@@ -173,30 +172,17 @@ void snd_hdac_stream_reset(struct hdac_stream *azx_dev)
dma_run_state = snd_hdac_stream_readb(azx_dev, SD_CTL) & SD_CTL_DMA_START;

snd_hdac_stream_updateb(azx_dev, SD_CTL, 0, SD_CTL_STREAM_RESET);
- udelay(3);
- timeout = 300;
- do {
- val = snd_hdac_stream_readb(azx_dev, SD_CTL) &
- SD_CTL_STREAM_RESET;
- if (val)
- break;
- } while (--timeout);
+
+ /* wait for hardware to report that the stream entered reset */
+ snd_hdac_stream_readb_poll(azx_dev, SD_CTL, val, (val & SD_CTL_STREAM_RESET), 3, 300);

if (azx_dev->bus->dma_stop_delay && dma_run_state)
udelay(azx_dev->bus->dma_stop_delay);

- val &= ~SD_CTL_STREAM_RESET;
- snd_hdac_stream_writeb(azx_dev, SD_CTL, val);
- udelay(3);
+ snd_hdac_stream_updateb(azx_dev, SD_CTL, SD_CTL_STREAM_RESET, 0);

- timeout = 300;
- /* waiting for hardware to report that the stream is out of reset */
- do {
- val = snd_hdac_stream_readb(azx_dev, SD_CTL) &
- SD_CTL_STREAM_RESET;
- if (!val)
- break;
- } while (--timeout);
+ /* wait for hardware to report that the stream is out of reset */
+ snd_hdac_stream_readb_poll(azx_dev, SD_CTL, val, !(val & SD_CTL_STREAM_RESET), 3, 300);

/* reset first position - may not be synced with hw at this time */
if (azx_dev->posbuf)
--
2.25.1
\
 
 \ /
  Last update: 2022-08-18 16:16    [W:0.313 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site