Messages in this thread | | | Date | Thu, 18 Aug 2022 11:22:54 +0300 | Subject | Re: [RFC PATCH 3/4] ARM: dts: stm32: add pin map for CAN controller on stm32f4 | From | Krzysztof Kozlowski <> |
| |
On 17/08/2022 17:35, Dario Binacchi wrote: > Add pin configurations for using CAN controller on stm32f469-disco > board. They are located on the Arduino compatible connector CN5 (CAN1) > and on the extension connector CN12 (CAN2). >
> + > + can2_pins_b: can2-1 { > + pins1 { > + pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */ > + > + }; > + pins2 { > + pinmux = <STM32_PINMUX('B', 12, AF9)>; /* CAN2_RX */ > + bias-pull-up; > + }; > + }; > +
No need for blank line.
Best regards, Krzysztof
| |