lkml.org 
[lkml]   [2022]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 7/9] clk: qcom: apss-ipq-pll: add support for IPQ8074
Date
Add support for IPQ8074 since it uses the same PLL setup, however it uses
slightly different Alpha PLL config.

Alpha PLL config was obtained by dumping PLL registers from a running
device.

Signed-off-by: Robert Marko <robimarko@gmail.com>
---
Changes in v2:
* Drop hardcoded compatible check for IPQ6018 to do the PLL config and
utilize match data provided by previous commit
* Add IPQ8074 Alpha PLL config using match data
* Update commit description to reflect changes
---
drivers/clk/qcom/apss-ipq-pll.c | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c
index a4016f3854c2..a5aea27eb867 100644
--- a/drivers/clk/qcom/apss-ipq-pll.c
+++ b/drivers/clk/qcom/apss-ipq-pll.c
@@ -49,6 +49,18 @@ static const struct alpha_pll_config ipq6018_pll_config = {
.test_ctl_hi_val = 0x4000,
};

+static const struct alpha_pll_config ipq8074_pll_config = {
+ .l = 0x48,
+ .config_ctl_val = 0x200d4828,
+ .config_ctl_hi_val = 0x6,
+ .early_output_mask = BIT(3),
+ .aux2_output_mask = BIT(2),
+ .aux_output_mask = BIT(1),
+ .main_output_mask = BIT(0),
+ .test_ctl_val = 0x1c000000,
+ .test_ctl_hi_val = 0x4000,
+};
+
static const struct regmap_config ipq_pll_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
@@ -89,6 +101,7 @@ static int apss_ipq_pll_probe(struct platform_device *pdev)

static const struct of_device_id apss_ipq_pll_match_table[] = {
{ .compatible = "qcom,ipq6018-a53pll", .data = &ipq6018_pll_config },
+ { .compatible = "qcom,ipq8074-a53pll", .data = &ipq8074_pll_config },
{ }
};
MODULE_DEVICE_TABLE(of, apss_ipq_pll_match_table);
--
2.37.2
\
 
 \ /
  Last update: 2022-08-19 00:07    [W:0.069 / U:0.612 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site