lkml.org 
[lkml]   [2022]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] net: dsa: mv88e6xxx: support RGMII cmode
On Tue, Aug 16, 2022 at 01:45:34PM +0200, Marcus Carlberg wrote:
> Since the probe defaults all interfaces to the highest speed possible
> (10GBASE-X in mv88e6393x) before the phy mode configuration from the
> devicetree is considered it is currently impossible to use port 0 in
> RGMII mode.
>
> This change will allow RGMII modes to be configurable for port 0
> enabling port 0 to be configured as RGMII as well as serial depending
> on configuration.

Hi Marcus

Can ports 9 and 10 do RGMII? I think not. So you should validate the
phy-mode in mv88e6393x_port_set_cmode().

Andrew

\
 
 \ /
  Last update: 2022-08-19 00:05    [W:0.034 / U:0.384 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site