lkml.org 
[lkml]   [2022]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [RFC v4 01/10] dt-bindings: pwm: Document Synopsys DesignWare snps,pwm-dw-apb-timers-pwm2
From
On 17/08/2022 00:14, Ben Dooks wrote:
> Add documentation for the bindings for Synopsys' DesignWare PWM block
> as we will be adding DT/platform support to the Linux driver soon.
>
> Signed-off-by: Ben Dooks <ben.dooks@sifive.com>
> ---
> v4:
> - fixed typos, added reg
> v3:
> - add description and example
> - merge the snps,pwm-number into this patch
> - rename snps,pwm to snps,dw-apb-timers-pwm2
> v2:
> - fix #pwm-cells to be 3
> - fix indentation and ordering issues
> ---
> .../bindings/pwm/snps,dw-apb-timers-pwm2.yaml | 69 +++++++++++++++++++
> 1 file changed, 69 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pwm/snps,dw-apb-timers-pwm2.yaml
>
> diff --git a/Documentation/devicetree/bindings/pwm/snps,dw-apb-timers-pwm2.yaml b/Documentation/devicetree/bindings/pwm/snps,dw-apb-timers-pwm2.yaml
> new file mode 100644
> index 000000000000..e7feae6d4404
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pwm/snps,dw-apb-timers-pwm2.yaml
> @@ -0,0 +1,69 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) 2022 SiFive, Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pwm/snps,dw-apb-timers-pwm2.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Synopsys DW-APB timers PWM controller
> +
> +maintainers:
> + - Ben Dooks <ben.dooks@sifive.com>
> +
> +description:
> + This describes the DesignWare APB timers module when used in the PWM
> + mode. The IP core can be generated with various options which can
> + control the functionality, the number of PWMs available and other
> + internal controls the designer requires.
> +
> + The IP block has a version register so this can be used for detection
> + instead of having to encode the IP version number in the device tree
> + comaptible.
> +
> +allOf:
> + - $ref: pwm.yaml#
> +
> +properties:
> + compatible:
> + const: snps,dw-apb-timers-pwm2
> +
> + "#pwm-cells":
> + const: 3
> +
> + clocks:
> + items:
> + - description: Interface bus clock
> + - description: PWM reference clock
> +
> + clock-names:
> + items:
> + - const: bus
> + - const: timer
> +
> + snps,pwm-number:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: The number of PWM channels configured for this instance
> + enum: [1, 2, 3, 4, 5, 6, 7, 8]
> +
> + reg:
> + maxItems: 1
> +
> +required:
> + - "#pwm-cells"
> + - compatible
> + - reg

Keep the same order as list of properties.

> + - clocks
> + - clock-names
> +
> +additionalProperties: false
> +
> +

Just one blank line.

> +examples:
> + - |
> + pwm: pwm@180000 {
> + #pwm-cells = <3>;
> + compatible = "snps,dw-apb-timers-pwm2";
> + reg = <0x180000 0x200>;

The convention of DTS is: compatible, then reg, then rest of properties.

> + clocks = <&bus &timer>;

You put here one item, not two. This has to be <&bus>, <&timer>

> + clock-names = "bus", "timer";
> + };


Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-08-17 07:59    [W:0.242 / U:1.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site