lkml.org 
[lkml]   [2022]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFT PATCH v2 15/17] ARM: dts: qcom: msm8974: switch TCSR mutex to MMIO
Date
The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap). This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:

qcom-msm8974-sony-xperia-rhine-amami.dtb: tcsr-mutex: 'reg' is a required property
qcom-msm8974-sony-xperia-rhine-amami.dtb: tcsr-mutex: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/qcom-msm8974.dtsi | 12 +++---------
1 file changed, 3 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index ada232bed2c8..6bb06eaf08fd 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1228,9 +1228,10 @@ smd-edge {
};
};

- tcsr_mutex_block: syscon@fd484000 {
- compatible = "syscon";
+ tcsr_mutex: hwlock@fd484000 {
+ compatible = "qcom,msm8974-tcsr-mutex", "qcom,tcsr-mutex";
reg = <0xfd484000 0x1000>;
+ #hwlock-cells = <1>;
};

tcsr_1: syscon@fd485000 {
@@ -1719,13 +1720,6 @@ reboot-mode {
};
};

- tcsr_mutex: tcsr-mutex {
- compatible = "qcom,tcsr-mutex";
- syscon = <&tcsr_mutex_block 0 0x80>;
-
- #hwlock-cells = <1>;
- };
-
thermal-zones {
cpu0-thermal {
polling-delay-passive = <250>;
--
2.34.1
\
 
 \ /
  Last update: 2022-08-17 17:02    [W:0.140 / U:0.692 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site