Messages in this thread Patch in this message | | | From | Eliav Farber <> | Subject | [PATCH v2 13/16] hwmon: (mr75203) add thermal coefficient properties for Moortec PVT controller | Date | Wed, 17 Aug 2022 05:43:18 +0000 |
| |
Add optional "ts-coeff-g", "ts-coeff-h", "ts-coeff-cal5" and "ts-coeff-j" properties to be used instead of defaults for the thermal equasion.
Signed-off-by: Eliav Farber <farbere@amazon.com> --- .../bindings/hwmon/moortec,mr75203.yaml | 33 +++++++++++++++++++ 1 file changed, 33 insertions(+)
diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml index e2a55001eefc..867664bd937f 100644 --- a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml +++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml @@ -62,6 +62,30 @@ properties: used to normalzie the voltage output results. $ref: /schemas/types.yaml#definitions/uint32 + ts-coeff-g: + description: + G coefficient for thermal equation. + maxItems: 1 + $ref: /schemas/types.yaml#definitions/uint32 + + ts-coeff-h: + description: + H coefficient for thermal equation. + maxItems: 1 + $ref: /schemas/types.yaml#definitions/uint32 + + ts-coeff-cal5: + description: + cal5 coefficient for thermal equation (can't be 0). + maxItems: 1 + $ref: /schemas/types.yaml#definitions/uint32 + + ts-coeff-j: + description: + J coefficient for thermal equation. + maxItems: 1 + $ref: /schemas/types.yaml#definitions/int32 + required: - compatible - reg @@ -75,6 +99,10 @@ additionalProperties: - reset-control-skip - vm-active-channels - vm-pre-scalar-ch# + - ts-coeff-g + - ts-coeff-h + - ts-coeff-cal5 + - ts-coeff-j examples: - | @@ -90,5 +118,10 @@ examples: resets = <&rcu0 0x40 7>; vm-active-channels = [08 10 02]; vm-pre-scalar-ch5 = <2>; + ts-coeff-g = <57400>; + ts-coeff-h = <249400>; + ts-coeff-cal5 = <4096>; + ts-coeff-j = <0>; + #thermal-sensor-cells = <1>; }; -- 2.37.1
| |