lkml.org 
[lkml]   [2022]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/2] ASoC: Intel: Skylake: try to get NHLT blob with PCM params as fallback
From
Date
在 2022-08-16星期二的 21:08 +0200,Cezary Rojewski写道:
> On 2022-08-07 7:26 PM, Icenowy Zheng wrote:
> > 在 2022-08-02星期二的 12:30 +0200,Cezary Rojewski写道:
> > > On 2022-07-25 1:10 PM, Icenowy Zheng wrote:
> > > > Switching to use pipeline parameters to get NHLT blob breaks
> > > > audio
> > > > on
> > > > HP Chromebook 13 G1 (at least with MrChromeBox firmware).
>
> ...
>
> > > Could you share the NHLT file from your platform plus the format
> > > used
> > > by
> > > the cras/userspace tool? Did you try playing over simple aplay
> > > tool
> > > instead?
> >
> > I tried 48000Hz 2ch 32bit with speaker-test.
> >
> > Attached is /sys/firmware/acpi/tables/NHLT.
>
>
> Thanks for the NHLT dump. Total of five endpoints are part of the
> description:
>
> id 0, DMIC capture, formats:
>         [0] 2/16/16/48000
>         [1] 2/32/32/48000
> id 1, I2S SSP0 playback, formats:
>         [0] 2/24/32/48000
> id 2, I2S SSP0 capture, formats:
>         [0] 4/32/32/48000
> id 3, I2S SSP1 playback, formats:
>         [0] 2/24/32/48000
> id 4, I2S SSP1 capture, formats:
>         [0] 2/24/32/48000
>
> I know not what "speaker-test" means. Could you specify which
> endpoint

Well to be honest I know nearly nothing about Intel ASoC. (In fact I
have only a little experience dealing with ASoC on DT-based platforms
with asoc-simple-card)

I assume it uses the first playback stream, because I didn't explicitly
choose any streams; and speaker-test is only a playback test program.

> you are speaking of? Providing either alsa info or at least output of
> 'lsmod | grep snd' would help. I'd like to be aware of which machine
> board are we talking about.
>
> What could be guessed with the current info (and some google query),
> is
> that we are dealing with SKL-Y m5-6Y57, codenamed 'Chell' and the
> speaker-test is playing through an I2S codec connected to SSP0 port.
> It's probably max98357a. The skylake-driver version you have gets
> confused with 24/32 format (userspace is probably attempting 32/32).
> That or topology file is incorrect..

Yes, it's Chell.

BTW do you need other ACPI tables?

>
> ..and at this point I probably know more than enough. We have tested
> basically all of the KBL and AML configurations when fixing
> regressions
> during recent skylake-driver up-revs. But Chell (and Lars for that
> matter) families were not among them as these are based on SKL. I'll
> follow up on this with our partners and come back here. I'm almost
> certain topology files for the two families mentioned were not
> updated
> along the way.

Could this be an issue of Coreboot, which generates the NHLT table?

BTW I think Google pinned the official OS of this hardware to a much
lower kernel version (but I don't want to use the official OS because
of limited storage of Chell and lack of VM ability of the OS on Chell).

>
>
> Regards,
> Czarek


\
 
 \ /
  Last update: 2022-08-17 14:50    [W:0.081 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site