lkml.org 
[lkml]   [2022]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [Intel-gfx] [PATCH] drm/i915: Switch TGL-H DP-IN to dGFX when it's supported
On Wed, Aug 17, 2022 at 7:59 PM Ville Syrjälä
<ville.syrjala@linux.intel.com> wrote:

[snipped]

> I had a quick trawl through some Windows stuff for this and
> it does seem to do a few extra checks:
> - platform must be TGL-H (nothing else has the DPin stuff I guess)
> - OpRegion header must indicate dGPU presence

Is the dGPU presence denoted by the return bitmask of
INTEL_DSM_FN_GET_BIOS_DATA_FUNCS_SUPPORTED?

IIUC the mask 20 won't be set when dGPU is not present.

>
> Otherwise it does call this DSM uncoditionally on boot/S4 resume
> so seems like that is the only really validated configuration.
> Although it does seem to explicitly turn off displays prior to
> the DSM so that does perhaps indicate that those ports might have
> also been enabled via the iGPU by the BIOS. Not sure if disabling
> the ports would work correctly after the DSM or not. If not then
> the DSM call would need to happen after state readout/sanitization
> so that we can shut things down gracefully.
>
> Additionally after the DSM call it scans the FIA TC live state
> bits to check for DPin usage. Looks like its trying to make sure
> the driver stops poking at the relevant power wells once in DPin
> mode. i915 doesn't check that stuff atm so we might end up
> mangling something while the dGPU is driving the port.

Thanks for investigating this. I am not really familiar with other
stuffs you mentioned, but I am happy to test any follow-up patch.

Kai-Heng

>
> --
> Ville Syrjälä
> Intel

\
 
 \ /
  Last update: 2022-08-17 14:16    [W:0.060 / U:0.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site