lkml.org 
[lkml]   [2022]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFT PATCH 10/14] arm64: dts: qcom: sdm845: split TCSR halt regs out of mutex
Date
The TCSR halt regs are next to TCSR mutex, so before converting the TCSR
mutex into device with address space, we need to split the halt regs to
its own syscon device. This also describes more accurately the devices
and their IO address space.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index f0e286715d1b..21ed14200986 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2590,7 +2590,12 @@ ipa: ipa@1e40000 {

tcsr_mutex_regs: syscon@1f40000 {
compatible = "syscon";
- reg = <0 0x01f40000 0 0x40000>;
+ reg = <0 0x01f40000 0 0x20000>;
+ };
+
+ tcsr_regs_1: sycon@1f60000 {
+ compatible = "qcom,sdm845-tcsr", "syscon";
+ reg = <0 0x01f60000 0 0x20000>;
};

tlmm: pinctrl@3400000 {
@@ -3207,7 +3212,7 @@ mss_pil: remoteproc@4080000 {
<&pdc_reset PDC_MODEM_SYNC_RESET>;
reset-names = "mss_restart", "pdc_reset";

- qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
+ qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>;

power-domains = <&rpmhpd SDM845_CX>,
<&rpmhpd SDM845_MX>,
--
2.34.1
\
 
 \ /
  Last update: 2022-08-17 14:06    [W:0.094 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site