lkml.org 
[lkml]   [2022]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v3 1/4] regulator: dt-bindings: Add Allwinner D1 LDOs
From
On 17/08/2022 11:15, Samuel Holland wrote:

>>> +
>>> +properties:
>>> + compatible:
>>> + enum:
>>> + - allwinner,sun20i-d1-analog-ldos
>>> +
>>> + reg:
>>> + maxItems: 1
>>> +
>>> + nvmem-cells:
>>> + items:
>>> + - description: NVMEM cell for the calibrated bandgap reference trim value
>>> +
>>> + nvmem-cell-names:
>>> + items:
>>> + - const: bg_trim
>>> +
>>> +patternProperties:
>>> + "^(a|hp)ldo$":
>>> + type: object
>>> + $ref: regulator.yaml#
>>> + unevaluatedProperties: false
>>> +
>>> +required:
>>> + - compatible
>>> + - reg
>>> + - nvmem-cells
>>> + - nvmem-cell-names
>>> +
>>> +unevaluatedProperties: false
>>> +
>>> +examples:
>>> + - |
>>> + audio-codec@2030000 {
>>> + compatible = "simple-mfd", "syscon";
>>
>> This cannot be on its own. Both require device specific compatible.
>
> Again, the device-specific compatible does not exist, because the binding for
> the audio codec has not been written (and it will be quite nontrivial).
>
> So I can:
> 1) Leave the example as-is until the audio codec binding gets written,
> and fill in the specific compatible at that time.
> 2) Remove the example, with the reasoning that the example really
> belongs with the MFD parent (like for the other regulator). Then
> there will be no example until the audio codec binding is written.
> 3) Drop the analog LDOs from this series entirely, and some parts
> of the SoC (like thermal monitoring) cannot be added to the DTSI
> until the audio codec binding is written.
>
> What do you think?

How about just removing the audio-codec node? The schema is about
regulators, not audio-codec.

OTOH, if you have parent device schema, you could put the example only
there. But as I understand, you don't have, right?

>
> The same question applies for the D1 SoC DTSI, where I use this same construct.

This is not correct and should be fixed. Either you add the schema with
compatible or please drop the device node from the DTSI.

>
> (And technically this does validate with the current schema.)
>
>>> + reg = <0x2030000 0x1000>;
>>> + ranges;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> +
>>> + regulators@2030348 {
>>> + compatible = "allwinner,sun20i-d1-analog-ldos";
>>> + reg = <0x2030348 0x4>;
>>> + nvmem-cells = <&bg_trim>;
>>> + nvmem-cell-names = "bg_trim";
>>> +
>>> + reg_aldo: aldo {
>>> + regulator-min-microvolt = <1800000>;
>>> + regulator-max-microvolt = <1800000>;
>>> + };
>>> +
>>> + reg_hpldo: hpldo {
>>> + regulator-min-microvolt = <1800000>;
>>> + regulator-max-microvolt = <1800000>;
>>> + };
>>> + };
>>> + };
>>> +
>>> +...
>>> diff --git a/Documentation/devicetree/bindings/regulator/allwinner,sun20i-d1-system-ldos.yaml b/Documentation/devicetree/bindings/regulator/allwinner,sun20i-d1-system-ldos.yaml
>>> new file mode 100644
>>> index 000000000000..e3e2810fb3d7
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/regulator/allwinner,sun20i-d1-system-ldos.yaml
>>> @@ -0,0 +1,37 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/regulator/allwinner,sun20i-d1-system-ldos.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Allwinner D1 System LDOs
>>> +
>>> +description:
>>> + Allwinner D1 contains a pair of general-purpose LDOs which are designed to
>>> + supply power inside and outside the SoC. They are controlled by a register
>>> + within the system control MMIO space.
>>
>> Fix order.
>>
>>
>>> +
>>> +maintainers:
>>> + - Samuel Holland <samuel@sholland.org>
>>> +
>>> +properties:
>>> + compatible:
>>> + enum:
>>> + - allwinner,sun20i-d1-system-ldos
>>> +
>>> + reg:
>>> + maxItems: 1
>>> +
>>> +patternProperties:
>>> + "^ldo[ab]$":
>>> + type: object
>>> + $ref: regulator.yaml#
>>> + unevaluatedProperties: false
>>> +
>>> +required:
>>> + - compatible
>>> + - reg
>>> +
>>> +unevaluatedProperties: false
>>
>>
>> Example please.
>
> Rob asked me to move the example to the parent binding, so I did. The example is
> added in patch 3.

Yeah, I noticed it later. It's fine.

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-08-17 10:29    [W:0.069 / U:0.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site