lkml.org 
[lkml]   [2022]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/5] Make atmel serial driver aware of GCLK
Date
This series of patches introduces the GCLK as a potential clock source for
the baudrate generator of UART on sama5d2 SoCs. Unlike the serial mode of
the USART offered by FLEXCOM, the UART does not provide a fractional part
that can be added to the clock divisor to obtain a more accurate result,
which greatly decreases the flexibility available for producing a higher
variety of baudrates. Now, with the last patch of the series, the driver
will check for a GCLK in the DT. If provided, whenever `atmel_set_termios`
is called, unless there is a fractional part, the driver will compare the
error rate between the desired baudrate and the actual baudrate obtained
through each of the available clock sources and will choose the clock source
with the lowest error rate. While at it, convert the DT binding
for UART/USART to json-schema, update the FLEXCOM binding to reference the
new UART/USART binding and differentiate between the SPI of USART and the
SPI of FLEXCOM.

The first three patches of this patch series depend on this patch series
converting atmel-flexcom bindings to json-schema:
https://lore.kernel.org/all/20220708115619.254073-1-kavyasree.kotagiri@microchip.com/

Sergiu Moga (5):
dt-bindings: mfd: atmel,sama5d2-flexcom: Add SPI child node ref
binding
dt-bindings: mfd: atmel,at91-usart: convert to json-schema
dt-bindings: mfd: atmel,sama5d2-flexcom: Add USART child node ref
binding
clk: at91: sama5d2: Add Generic Clocks for UART/USART
tty: serial: atmel: Make the driver aware of the existence of GCLK

.../bindings/mfd/atmel,at91-usart.yaml | 190 ++++++++++++++++++
.../bindings/mfd/atmel,sama5d2-flexcom.yaml | 18 +-
.../devicetree/bindings/mfd/atmel-usart.txt | 98 ---------
drivers/clk/at91/sama5d2.c | 10 +
drivers/tty/serial/atmel_serial.c | 52 ++++-
drivers/tty/serial/atmel_serial.h | 1 +
6 files changed, 264 insertions(+), 105 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/atmel,at91-usart.yaml
delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-usart.txt

--
2.25.1

\
 
 \ /
  Last update: 2022-08-17 10:05    [W:0.185 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site