lkml.org 
[lkml]   [2022]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/2] Add device tree for Ampere's Mt. Mitchell BMC
Date
The Mt. Mitchell BMC is an ASPEED AST2600-based BMC for the Mt. Mitchell
hardware reference platform with AmpereOne(TM) processor.

v3 :
+ Change adc-i2c node to generic adc node [Krzysztof]
+ Remove unused status property in adc node [Krzysztof]
+ Remove trailing blank line at the end of file [Krzysztof]
+ Fix alphabetical order in dt-binding documentation [Krzysztof]
+ Remove the wrong comment on vga_memory nodes [Andrew]
+ Remove gpio-keys [Andrew]
+ Remove the line-name for bmc-debug-mode, eth-phy-rst-n,
eth-phy-int-n, bmc-salt12-s0-ssif-n, fpga-program-b,
bmc-uart-cts1, bmc-spi-fm-boot-abr-pd, emmc-rst-n gpios [Andrew]
+ Update line-name for hs-csout-prochot, s1-spi-auth-fail-n [Quan]
+ Add line-name [s0|s1]-heartbeat [Quan]

v2 :
+ Add Ampere Mt. Mitchell BMC compatible [Krzysztof]
+ Remove bootargs [Krzysztof]
+ Fix gpio-keys nodes name to conform with device tree binding
documents [Krzysztof]
+ Fix some nodes to use generic name [Krzysztof]
+ Remove unnecessary blank line [Krzysztof]
+ Fix typo "LTC" to "LLC" in license info and corrected license
info to GPL-2.0-only

Quan Nguyen (2):
dt-bindings: arm: aspeed: document Ampere Mt.Mitchell BMC compatibles
ARM: dts: aspeed: Add device tree for Ampere's Mt. Mitchell BMC

.../bindings/arm/aspeed/aspeed.yaml | 1 +
arch/arm/boot/dts/Makefile | 1 +
.../boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 546 ++++++++++++++++++
3 files changed, 548 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts

--
2.35.1

\
 
 \ /
  Last update: 2022-08-17 09:18    [W:0.084 / U:0.652 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site