lkml.org 
[lkml]   [2022]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1] uio: dfl: add IOPLL user-clock feature id
Date
Add a Device Feature List (DFL) feature id for the configurable
IOPLL user clock source, which can be used to configure the clock
speeds that are used for RTL logic that is programmed into the
Partial Reconfiguration (PR) region of an FPGA.

The DFL feature id table can be found at:
https://github.com/OPAE/dfl-feature-id

Signed-off-by: Peter Colberg <peter.colberg@intel.com>
---
drivers/uio/uio_dfl.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/uio/uio_dfl.c b/drivers/uio/uio_dfl.c
index 8f39cc8bb034..69e93f3e7faf 100644
--- a/drivers/uio/uio_dfl.c
+++ b/drivers/uio/uio_dfl.c
@@ -46,10 +46,12 @@ static int uio_dfl_probe(struct dfl_device *ddev)

#define FME_FEATURE_ID_ETH_GROUP 0x10
#define FME_FEATURE_ID_HSSI_SUBSYS 0x15
+#define PORT_FEATURE_ID_IOPLL_USRCLK 0x14

static const struct dfl_device_id uio_dfl_ids[] = {
{ FME_ID, FME_FEATURE_ID_ETH_GROUP },
{ FME_ID, FME_FEATURE_ID_HSSI_SUBSYS },
+ { PORT_ID, PORT_FEATURE_ID_IOPLL_USRCLK },
{ }
};
MODULE_DEVICE_TABLE(dfl, uio_dfl_ids);
--
2.28.0
\
 
 \ /
  Last update: 2022-08-17 23:39    [W:0.081 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site