lkml.org 
[lkml]   [2022]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 2/2] pinctrl: mediatek: add mt8188 driver
Hi Hui,

On Mon, Aug 01, 2022 at 05:52:15PM +0800, Hui Liu wrote:
> From: "Hui.Liu" <hui.liu@mediatek.com>
>
> Add pinctrl driver support for MediaTek SoC mt8188.
>
> Signed-off-by: Hui.Liu <hui.liu@mediatek.com>
> ---
[..]
> --- /dev/null
> +++ b/drivers/pinctrl/mediatek/pinctrl-mt8188.c
[..]
> +static const struct mtk_pin_field_calc mt8188_pin_mode_range[] = {
> + PIN_FIELD(0, 177, 0x0300, 0x10, 0, 4),
> +};

Missing blank line after declaration.

> +static const struct mtk_pin_field_calc mt8188_pin_dir_range[] = {
> + PIN_FIELD(0, 177, 0x0000, 0x10, 0, 1),
> +};

Ditto.

> +static const struct mtk_pin_field_calc mt8188_pin_di_range[] = {
> + PIN_FIELD(0, 177, 0x0200, 0x10, 0, 1),
> +};

Ditto.

> +static const struct mtk_pin_field_calc mt8188_pin_do_range[] = {
> + PIN_FIELD(0, 177, 0x0100, 0x10, 0, 1),
> +};

Ditto.

> +static const struct mtk_pin_field_calc mt8188_pin_smt_range[] = {
[..]
> +static const struct mtk_pin_reg_calc mt8188_reg_cals[PINCTRL_PIN_REG_MAX] = {
> + [PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt8188_pin_mode_range),
> + [PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt8188_pin_dir_range),
> + [PINCTRL_PIN_REG_DI] = MTK_RANGE(mt8188_pin_di_range),
> + [PINCTRL_PIN_REG_DO] = MTK_RANGE(mt8188_pin_do_range),
> + [PINCTRL_PIN_REG_SMT] = MTK_RANGE(mt8188_pin_smt_range),
> + [PINCTRL_PIN_REG_IES] = MTK_RANGE(mt8188_pin_ies_range),
> + [PINCTRL_PIN_REG_TDSEL] = MTK_RANGE(mt8188_pin_tdsel_range),
> + [PINCTRL_PIN_REG_RDSEL] = MTK_RANGE(mt8188_pin_rdsel_range),
> + [PINCTRL_PIN_REG_PUPD] = MTK_RANGE(mt8188_pin_pupd_range),
> + [PINCTRL_PIN_REG_R0] = MTK_RANGE(mt8188_pin_r0_range),
> + [PINCTRL_PIN_REG_R1] = MTK_RANGE(mt8188_pin_r1_range),
> + [PINCTRL_PIN_REG_PU] = MTK_RANGE(mt8188_pin_pu_range),
> + [PINCTRL_PIN_REG_PD] = MTK_RANGE(mt8188_pin_pd_range),
> + [PINCTRL_PIN_REG_DRV] = MTK_RANGE(mt8188_pin_drv_range),
> + [PINCTRL_PIN_REG_DRV_ADV] = MTK_RANGE(mt8188_pin_drv_adv_range),
> + [PINCTRL_PIN_REG_RSEL] = MTK_RANGE(mt8188_pin_rsel_range),

Please use just space around the = instead of tabs. Like is done on mt8183,
mt8186, mt8192 and mt8195.

> +};
[..]
> +static const struct mtk_pin_soc mt8188_data = {
> + .reg_cal = mt8188_reg_cals,
> + .pins = mtk_pins_mt8188,
> + .npins = ARRAY_SIZE(mtk_pins_mt8188),
> + .ngrps = ARRAY_SIZE(mtk_pins_mt8188),
> + .eint_hw = &mt8188_eint_hw,
> + .nfuncs = 8,
> + .gpio_m = 0,
> + .base_names = mt8188_pinctrl_register_base_name,
> + .nbase_names = ARRAY_SIZE(mt8188_pinctrl_register_base_name),
> + .bias_set_combo = mtk_pinconf_bias_set_combo,
> + .pull_type = mt8188_pull_type,
> + .pin_rsel = mt8188_pin_rsel_val_range,
> + .npin_rsel = ARRAY_SIZE(mt8188_pin_rsel_val_range),
> + .bias_get_combo = mtk_pinconf_bias_get_combo,

Keep this one together with bias_set_combo.

> + .drive_set = mtk_pinconf_drive_set_rev1,
> + .drive_get = mtk_pinconf_drive_get_rev1,
> + .adv_drive_set = mtk_pinconf_adv_drive_set_raw,
> + .adv_drive_get = mtk_pinconf_adv_drive_get_raw,

And also use spaces instead of tabs for all entries here.

With those changes,

Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>

Thanks,
Nícolas

\
 
 \ /
  Last update: 2022-08-17 21:57    [W:0.054 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site