lkml.org 
[lkml]   [2022]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] PCI/PM: Switch D3Hot delay to also use usleep_range
On 08/17/2022, Matthias Kaehlcke wrote:
> Hi Will,
>
> On Wed, Aug 17, 2022 at 06:52:02PM +0000, Will McVicker wrote:
> > From: Sajid Dalvi <sdalvi@google.com>
> >
> > Since the PCI spec requires a 10ms D3Hot delay (defined by
> > PCI_PM_D3HOT_WAIT) and a few of the PCI quirks update the D3Hot delay up
> > to 120ms, let's add support for both usleep_range and msleep based on
> > the delay time to improve the delay accuracy.
> >
> > This patch is based off of a commit from Sajid Dalvi <sdalvi@google.com>
> > in the Pixel 6 kernel tree [1]. Testing on a Pixel 6, found that the
> > 10ms delay for the Exynos PCIe device was on average delaying for 19ms
> > when the spec requires 10ms. Switching from msleep to uslseep_range
> > therefore decreases the resume time on a Pixel 6 on average by 9ms.
> >
> > [1] https://android.googlesource.com/kernel/gs/+/18a8cad68d8e6d50f339a716a18295e6d987cee3
> >
> > Signed-off-by: Sajid Dalvi <sdalvi@google.com>
> > Signed-off-by: Will McVicker <willmcvicker@google.com>
> > ---
> > drivers/pci/pci.c | 20 +++++++++++++++-----
> > 1 file changed, 15 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> > index 95bc329e74c0..97a042ca9032 100644
> > --- a/drivers/pci/pci.c
> > +++ b/drivers/pci/pci.c
> > @@ -63,16 +63,26 @@ struct pci_pme_device {
> > };
> >
> > #define PME_TIMEOUT 1000 /* How long between PME checks */
> > +#define MAX(a, b) ((a) >= (b) ? (a) : (b))
>
> no need to define this macro, you can use max() from
> include/linux/minmax.h instead.
>
> >
> > static void pci_dev_d3_sleep(struct pci_dev *dev)
> > {
> > - unsigned int delay = dev->d3hot_delay;
> > + unsigned int delay_ms = dev->d3hot_delay;
> >
> > - if (delay < pci_pm_d3hot_delay)
> > - delay = pci_pm_d3hot_delay;
> > + if (delay_ms < pci_pm_d3hot_delay)
> > + delay_ms = pci_pm_d3hot_delay;
>
> nit: since you are already touching this code you could change it to:
>
> unsigned int delay_ms = max(dev->d3hot_delay, pci_pm_d3hot_delay);
>
> >
> > - if (delay)
> > - msleep(delay);
> > + if (delay_ms) {
> > + if (delay_ms <= 20) {
> > + /* Use a 20-25% upper bound with 1ms minimum */
> > + unsigned int upper = MAX((delay_ms >> 3) << 1, 1);
>
> Not sure this optimization of using bit shifts instead of the clearer do_div()
> is really needed here. pci_dev_d3_sleep() is not a super hot code path IIUC.
>
> > +
> > + usleep_range(delay_ms * USEC_PER_MSEC,
> > + (delay_ms + upper) * USEC_PER_MSEC);
> > + } else {
> > + msleep(delay_ms);
> > + }
> > + }
> > }
> >
> > bool pci_reset_supported(struct pci_dev *dev)
> >
> > base-commit: 274a2eebf80c60246f9edd6ef8e9a095ad121264
> > --
> > 2.37.1.595.g718a3a8f04-goog
> >

Thanks for the suggestions! I'll update those in the next patchset.

--Will

\
 
 \ /
  Last update: 2022-08-17 21:54    [W:0.068 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site