lkml.org 
[lkml]   [2022]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] locking/atomic: Make test_and_*_bit() ordered on failure
On Tue, Aug 16, 2022 at 10:17 AM Arnd Bergmann <arnd@arndb.de> wrote:
>
> On Tue, Aug 16, 2022 at 9:03 AM Hector Martin <marcan@marcan.st> wrote:
> >
> > These operations are documented as always ordered in
> > include/asm-generic/bitops/instrumented-atomic.h, and producer-consumer
> > type use cases where one side needs to ensure a flag is left pending
> > after some shared data was updated rely on this ordering, even in the
> > failure case.
> >
> > This is the case with the workqueue code, which currently suffers from a
> > reproducible ordering violation on Apple M1 platforms (which are
> > notoriously out-of-order) that ends up causing the TTY layer to fail to
> > deliver data to userspace properly under the right conditions. This
> > change fixes that bug.
> >
> > Change the documentation to restrict the "no order on failure" story to
> > the _lock() variant (for which it makes sense), and remove the
> > early-exit from the generic implementation, which is what causes the
> > missing barrier semantics in that case. Without this, the remaining
> > atomic op is fully ordered (including on ARM64 LSE, as of recent
> > versions of the architecture spec).
> >
> > Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
> > Cc: stable@vger.kernel.org
> > Fixes: e986a0d6cb36 ("locking/atomics, asm-generic/bitops/atomic.h: Rewrite using atomic_*() APIs")
> > Fixes: 61e02392d3c7 ("locking/atomic/bitops: Document and clarify ordering semantics for failed test_and_{}_bit()")
> > Signed-off-by: Hector Martin <marcan@marcan.st>
> > ---
> > Documentation/atomic_bitops.txt | 2 +-
> > include/asm-generic/bitops/atomic.h | 6 ------
>
> I double-checked all the architecture specific implementations to ensure
> that the asm-generic one is the only one that needs the fix.
>
> I assume this gets merged through the locking tree or that Linus picks it up
> directly, not through my asm-generic tree.
>
> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Testing this patch on pre Armv8.1 specifically Cortex-A72 and
Cortex-A53 cores I am seeing
a huge performance drop with this patch applied. Perf is showing
lock_is_held_type() as the worst offender
but that could just be the function getting blamed. The most obvious
indicator of the performance loss is
ssh throughput. With the patch I am only able to achieve around
20MB/s and without the patch I am able
to transfer around 112MB/s, no other changes.

When I have more time I can do some more in depth testing, but for now
I just wanted to bring this
issue up so perhaps others can chime in regarding how it performs on
their hardware.

-Jon

\
 
 \ /
  Last update: 2022-08-16 14:32    [W:0.111 / U:0.748 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site