lkml.org 
[lkml]   [2022]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[patch net v3] net: dsa: microchip: ksz9477: fix fdb_dump last invalid entry
Date
In the ksz9477_fdb_dump function it reads the ALU control register and
exit from the timeout loop if there is valid entry or search is
complete. After exiting the loop, it reads the alu entry and report to
the user space irrespective of entry is valid. It works till the valid
entry. If the loop exited when search is complete, it reads the alu
table. The table returns all ones and it is reported to user space. So
bridge fdb show gives ff:ff:ff:ff:ff:ff as last entry for every port.
To fix it, after exiting the loop the entry is reported only if it is
valid one.

Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
---
changes in v3
- changed the subject from net-next to net

changes in v2
- changed the fixes commit id
- reduced the indentation level by using ! and continue statement

drivers/net/dsa/microchip/ksz9477.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 4b14d80d27ed..e4f446db0ca1 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -613,6 +613,9 @@ int ksz9477_fdb_dump(struct ksz_device *dev, int port,
goto exit;
}

+ if (!(ksz_data & ALU_VALID))
+ continue;
+
/* read ALU table */
ksz9477_read_table(dev, alu_table);

base-commit: 7ebfc85e2cd7b08f518b526173e9a33b56b3913b
--
2.36.1

\
 
 \ /
  Last update: 2022-08-16 13:35    [W:0.050 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site