lkml.org 
[lkml]   [2022]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] drivers/perf: Change WARN_ON() to dev_err() on irq_set_affinity() failure
On Tue, Aug 16, 2022 at 03:37:29PM +0800, Yicong Yang wrote:
> On 2022/8/15 19:25, Mark Rutland wrote:
> > On Mon, Aug 15, 2022 at 05:28:15PM +0800, Yicong Yang wrote:
> >> From: Yicong Yang <yangyicong@hisilicon.com>
> >>
> >> The WARN_ON() on irq_set_affinity() failure is misused according to the [1]
> >> and may crash people's box unintentionally. This may also be redundant since
> >> in the failure case we may also trigger the WARN and dump the stack in the
> >> perf core[2] for a second time.
> >
> > In what way do you think are these misused? I can't immediately see what you
> > think applies from [1].
>
> As commented by irq_set_affinity() it "Fails if cpumask does not contain an online
> CPU"

In all of the cases below we've chosen an online CPU. So the only way this can
happen is if there is a bug in the code, in which case a WARN_ON() is
appropriate. Also, there are *other* reasons irq_set_affinity() can fail.

> which means we passed an invalid input, I think which violiates the "Do not
> use these macros when checking for invalid external inputs".

There is no external input here. The chosen CPU didn't come from userspace or
an external source; we chose it ourselves based on kernel internal data (e.g.
cpu_online_mask).

So that does not apply here.

> > In perf we rely upon interrupt affinity to enforce serialization in a few
> > places, so if we fail to set the interrupt affinity there are a number of
> > things which could go wrong (e.g. memory corruption, and all the fun that could
> > result from that). We use WARN_ON() to catch that early.
>
> If we'd like to catch this failure information early maybe a dev_err() should be
> enough to indicate this.

I don't see why it is necessary to change to dev_err().

> > I can't immediately see how [2] is relevant, since that's in the context of an
> > IPI handler, and this patch affects the affinity of the PMU HW IRQ handler.
>
> I think it's relevant (please correct me) as when I debug another pmu driver using
> MSI interrupt[*], I found I'll trigger the WARN() in [2] if the interrupt is not
> bind to the CPU which start trace. So I think it's required to handle the interrupt
> on the same CPU start the trace otherwise the "context" is mismatched.

Sorry, I had confused event_function_local() with event_function().

I still think we want to keep the WARN_ON() here since before we get to
event_function_local() we may do other things in the IRQ handler.

Thanks,
Mark.

>
> [*] https://lore.kernel.org/lkml/20220721130116.43366-3-yangyicong@huawei.com/
>
> Thanks.
>
> > Thanks,
> > Mark.
> >
> >>
> >> So change the WARN_ON() to dev_err() to just print the failure message.
> >>
> >> [1] https://github.com/torvalds/linux/blob/master/include/asm-generic/bug.h#L74
> >> [2] https://github.com/torvalds/linux/blob/master/kernel/events/core.c#L313
> >>
> >> Suggested-by: Greg KH <gregkh@linuxfoundation.org>
> >> [https://lore.kernel.org/lkml/YuOi3i0XHV++z1YI@kroah.com/]
> >> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
> >> ---
> >> drivers/perf/arm-ccn.c | 5 +++--
> >> drivers/perf/arm_dmc620_pmu.c | 3 ++-
> >> drivers/perf/arm_smmuv3_pmu.c | 6 ++++--
> >> drivers/perf/fsl_imx8_ddr_perf.c | 3 ++-
> >> drivers/perf/hisilicon/hisi_pcie_pmu.c | 6 ++++--
> >> drivers/perf/hisilicon/hisi_uncore_pmu.c | 6 ++++--
> >> drivers/perf/qcom_l2_pmu.c | 8 ++++++--
> >> drivers/perf/xgene_pmu.c | 6 ++++--
> >> 8 files changed, 29 insertions(+), 14 deletions(-)
> >>
> >> diff --git a/drivers/perf/arm-ccn.c b/drivers/perf/arm-ccn.c
> >> index 728d13d8e98a..83abd909ba49 100644
> >> --- a/drivers/perf/arm-ccn.c
> >> +++ b/drivers/perf/arm-ccn.c
> >> @@ -1210,8 +1210,9 @@ static int arm_ccn_pmu_offline_cpu(unsigned int cpu, struct hlist_node *node)
> >> return 0;
> >> perf_pmu_migrate_context(&dt->pmu, cpu, target);
> >> dt->cpu = target;
> >> - if (ccn->irq)
> >> - WARN_ON(irq_set_affinity(ccn->irq, cpumask_of(dt->cpu)));
> >> + if (ccn->irq && irq_set_affinity(ccn->irq, cpumask_of(dt->cpu)))
> >> + dev_err(ccn->dev, "Failed to set interrupt affinity\n");
> >> +
> >> return 0;
> >> }
> >>
> >> diff --git a/drivers/perf/arm_dmc620_pmu.c b/drivers/perf/arm_dmc620_pmu.c
> >> index 280a6ae3e27c..b59d3d9eb779 100644
> >> --- a/drivers/perf/arm_dmc620_pmu.c
> >> +++ b/drivers/perf/arm_dmc620_pmu.c
> >> @@ -621,7 +621,8 @@ static int dmc620_pmu_cpu_teardown(unsigned int cpu,
> >> perf_pmu_migrate_context(&dmc620_pmu->pmu, irq->cpu, target);
> >> mutex_unlock(&dmc620_pmu_irqs_lock);
> >>
> >> - WARN_ON(irq_set_affinity(irq->irq_num, cpumask_of(target)));
> >> + if (irq_set_affinity(irq->irq_num, cpumask_of(target)))
> >> + dev_err(dmc620_pmu->pmu.dev, "Failed to set interrupt affinity\n");
> >> irq->cpu = target;
> >>
> >> return 0;
> >> diff --git a/drivers/perf/arm_smmuv3_pmu.c b/drivers/perf/arm_smmuv3_pmu.c
> >> index 00d4c45a8017..05e1b3e274d7 100644
> >> --- a/drivers/perf/arm_smmuv3_pmu.c
> >> +++ b/drivers/perf/arm_smmuv3_pmu.c
> >> @@ -646,7 +646,8 @@ static int smmu_pmu_offline_cpu(unsigned int cpu, struct hlist_node *node)
> >>
> >> perf_pmu_migrate_context(&smmu_pmu->pmu, cpu, target);
> >> smmu_pmu->on_cpu = target;
> >> - WARN_ON(irq_set_affinity(smmu_pmu->irq, cpumask_of(target)));
> >> + if (irq_set_affinity(smmu_pmu->irq, cpumask_of(target)))
> >> + dev_err(smmu_pmu->dev, "Failed to set interrupt affinity\n");
> >>
> >> return 0;
> >> }
> >> @@ -892,7 +893,8 @@ static int smmu_pmu_probe(struct platform_device *pdev)
> >>
> >> /* Pick one CPU to be the preferred one to use */
> >> smmu_pmu->on_cpu = raw_smp_processor_id();
> >> - WARN_ON(irq_set_affinity(smmu_pmu->irq, cpumask_of(smmu_pmu->on_cpu)));
> >> + if (irq_set_affinity(smmu_pmu->irq, cpumask_of(smmu_pmu->on_cpu)))
> >> + dev_err(dev, "Failed to set interrupt affinity\n");
> >>
> >> err = cpuhp_state_add_instance_nocalls(cpuhp_state_num,
> >> &smmu_pmu->node);
> >> diff --git a/drivers/perf/fsl_imx8_ddr_perf.c b/drivers/perf/fsl_imx8_ddr_perf.c
> >> index 8e058e08fe81..c44192e2d9db 100644
> >> --- a/drivers/perf/fsl_imx8_ddr_perf.c
> >> +++ b/drivers/perf/fsl_imx8_ddr_perf.c
> >> @@ -671,7 +671,8 @@ static int ddr_perf_offline_cpu(unsigned int cpu, struct hlist_node *node)
> >> perf_pmu_migrate_context(&pmu->pmu, cpu, target);
> >> pmu->cpu = target;
> >>
> >> - WARN_ON(irq_set_affinity(pmu->irq, cpumask_of(pmu->cpu)));
> >> + if (irq_set_affinity(pmu->irq, cpumask_of(pmu->cpu)))
> >> + dev_err(pmu->dev, "Failed to set interrupt affinity\n");
> >>
> >> return 0;
> >> }
> >> diff --git a/drivers/perf/hisilicon/hisi_pcie_pmu.c b/drivers/perf/hisilicon/hisi_pcie_pmu.c
> >> index 21771708597d..90aed9e51396 100644
> >> --- a/drivers/perf/hisilicon/hisi_pcie_pmu.c
> >> +++ b/drivers/perf/hisilicon/hisi_pcie_pmu.c
> >> @@ -655,7 +655,8 @@ static int hisi_pcie_pmu_online_cpu(unsigned int cpu, struct hlist_node *node)
> >>
> >> if (pcie_pmu->on_cpu == -1) {
> >> pcie_pmu->on_cpu = cpu;
> >> - WARN_ON(irq_set_affinity(pcie_pmu->irq, cpumask_of(cpu)));
> >> + if (irq_set_affinity(pcie_pmu->irq, cpumask_of(cpu)))
> >> + pci_err(pcie_pmu->pdev, "Failed to set interrupt affinity\n");
> >> }
> >>
> >> return 0;
> >> @@ -681,7 +682,8 @@ static int hisi_pcie_pmu_offline_cpu(unsigned int cpu, struct hlist_node *node)
> >> perf_pmu_migrate_context(&pcie_pmu->pmu, cpu, target);
> >> /* Use this CPU for event counting */
> >> pcie_pmu->on_cpu = target;
> >> - WARN_ON(irq_set_affinity(pcie_pmu->irq, cpumask_of(target)));
> >> + if (irq_set_affinity(pcie_pmu->irq, cpumask_of(target)))
> >> + pci_err(pcie_pmu->pdev, "Failed to set interrupt affinity\n");
> >>
> >> return 0;
> >> }
> >> diff --git a/drivers/perf/hisilicon/hisi_uncore_pmu.c b/drivers/perf/hisilicon/hisi_uncore_pmu.c
> >> index fbc8a93d5eac..74397b5ec889 100644
> >> --- a/drivers/perf/hisilicon/hisi_uncore_pmu.c
> >> +++ b/drivers/perf/hisilicon/hisi_uncore_pmu.c
> >> @@ -492,7 +492,8 @@ int hisi_uncore_pmu_online_cpu(unsigned int cpu, struct hlist_node *node)
> >> hisi_pmu->on_cpu = cpu;
> >>
> >> /* Overflow interrupt also should use the same CPU */
> >> - WARN_ON(irq_set_affinity(hisi_pmu->irq, cpumask_of(cpu)));
> >> + if (irq_set_affinity(hisi_pmu->irq, cpumask_of(cpu)))
> >> + dev_err(hisi_pmu->dev, "Failed to set interrupt affinity\n");
> >>
> >> return 0;
> >> }
> >> @@ -525,7 +526,8 @@ int hisi_uncore_pmu_offline_cpu(unsigned int cpu, struct hlist_node *node)
> >> perf_pmu_migrate_context(&hisi_pmu->pmu, cpu, target);
> >> /* Use this CPU for event counting */
> >> hisi_pmu->on_cpu = target;
> >> - WARN_ON(irq_set_affinity(hisi_pmu->irq, cpumask_of(target)));
> >> + if (irq_set_affinity(hisi_pmu->irq, cpumask_of(target)))
> >> + dev_err(hisi_pmu->dev, "Failed to set interrupt affinity\n");
> >>
> >> return 0;
> >> }
> >> diff --git a/drivers/perf/qcom_l2_pmu.c b/drivers/perf/qcom_l2_pmu.c
> >> index 30234c261b05..c6fe01c7e637 100644
> >> --- a/drivers/perf/qcom_l2_pmu.c
> >> +++ b/drivers/perf/qcom_l2_pmu.c
> >> @@ -793,7 +793,9 @@ static int l2cache_pmu_online_cpu(unsigned int cpu, struct hlist_node *node)
> >> cpumask_set_cpu(cpu, &l2cache_pmu->cpumask);
> >> cluster_pmu_reset();
> >>
> >> - WARN_ON(irq_set_affinity(cluster->irq, cpumask_of(cpu)));
> >> + if (irq_set_affinity(cluster->irq, cpumask_of(cpu)))
> >> + dev_err(&l2cache_pmu->pdev->dev,
> >> + "Failed to set interrupt affinity\n");
> >> enable_irq(cluster->irq);
> >>
> >> return 0;
> >> @@ -831,7 +833,9 @@ static int l2cache_pmu_offline_cpu(unsigned int cpu, struct hlist_node *node)
> >> perf_pmu_migrate_context(&l2cache_pmu->pmu, cpu, target);
> >> cluster->on_cpu = target;
> >> cpumask_set_cpu(target, &l2cache_pmu->cpumask);
> >> - WARN_ON(irq_set_affinity(cluster->irq, cpumask_of(target)));
> >> + if (irq_set_affinity(cluster->irq, cpumask_of(target)))
> >> + dev_err(&l2cache_pmu->pdev->dev,
> >> + "Failed to set interrupt affinity\n");
> >>
> >> return 0;
> >> }
> >> diff --git a/drivers/perf/xgene_pmu.c b/drivers/perf/xgene_pmu.c
> >> index 0c32dffc7ede..f31e678fdb69 100644
> >> --- a/drivers/perf/xgene_pmu.c
> >> +++ b/drivers/perf/xgene_pmu.c
> >> @@ -1790,7 +1790,8 @@ static int xgene_pmu_online_cpu(unsigned int cpu, struct hlist_node *node)
> >> cpumask_set_cpu(cpu, &xgene_pmu->cpu);
> >>
> >> /* Overflow interrupt also should use the same CPU */
> >> - WARN_ON(irq_set_affinity(xgene_pmu->irq, &xgene_pmu->cpu));
> >> + if (irq_set_affinity(xgene_pmu->irq, &xgene_pmu->cpu))
> >> + dev_err(xgene_pmu->dev, "Failed to set interrupt affinity\n");
> >>
> >> return 0;
> >> }
> >> @@ -1823,7 +1824,8 @@ static int xgene_pmu_offline_cpu(unsigned int cpu, struct hlist_node *node)
> >>
> >> cpumask_set_cpu(target, &xgene_pmu->cpu);
> >> /* Overflow interrupt also should use the same CPU */
> >> - WARN_ON(irq_set_affinity(xgene_pmu->irq, &xgene_pmu->cpu));
> >> + if (irq_set_affinity(xgene_pmu->irq, &xgene_pmu->cpu))
> >> + dev_err(xgene_pmu->dev, "Failed to set interrupt affinity\n");
> >>
> >> return 0;
> >> }
> >> --
> >> 2.24.0
> >>
> > .
> >

\
 
 \ /
  Last update: 2022-08-16 13:01    [W:0.130 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site