lkml.org 
[lkml]   [2022]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 09/16] hwmon: (mr75203) add VM pre-scalar property for Moortec PVT controller
Date
vm-pre-scalar-ch# is a per channel optional parameter that can be
used to normalzie the voltage output results.

Signed-off-by: Eliav Farber <farbere@amazon.com>
---
.../devicetree/bindings/hwmon/moortec,mr75203.yaml | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
index 6111b5069b3c..e2a55001eefc 100644
--- a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
+++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
@@ -56,6 +56,12 @@ properties:
A value of 0 means that the entire VM sensor is nou used.
$ref: /schemas/types.yaml#definitions/uint8-array

+ vm-pre-scalar-ch#:
+ description:
+ vm-active-channels defines the pre-scalar per channel value
+ used to normalzie the voltage output results.
+ $ref: /schemas/types.yaml#definitions/uint32
+
required:
- compatible
- reg
@@ -68,6 +74,7 @@ additionalProperties:
- intel,vm-map
- reset-control-skip
- vm-active-channels
+ - vm-pre-scalar-ch#

examples:
- |
@@ -82,5 +89,6 @@ examples:
clocks = <&osc0>;
resets = <&rcu0 0x40 7>;
vm-active-channels = [08 10 02];
+ vm-pre-scalar-ch5 = <2>;
#thermal-sensor-cells = <1>;
};
--
2.37.1
\
 
 \ /
  Last update: 2022-08-16 11:42    [W:1.131 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site