lkml.org 
[lkml]   [2022]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v1] PCI/PM: Switch D3Hot delay to use usleep_range
On Thu, Aug 11, 2022 at 06:40:01PM +0000, Will McVicker wrote:
> From: Sajid Dalvi <sdalvi@google.com>
>
> Since the PCI spec requires a 10ms D3Hot delay (defined by
> PCI_PM_D3HOT_WAIT) and a few of the PCI quirks update the D3Hot delay up
> to 20ms, let's switch from msleep to usleep_range to improve the delay
> accuracy.
>
> This patch came from Sajid Dalvi <sdalvi@google.com> in the Pixel 6
> kernel tree [1]. Testing on a Pixel 6, found that the 10ms delay for
> the Exynos PCIe device was on average delaying for 19ms when the spec
> requires 10ms. Switching from msleep to uslseep_delay therefore
> decreases the resume time on a Pixel 6 on average by 9ms.
>
> [1] https://android.googlesource.com/kernel/gs/+/18a8cad68d8e6d50f339a716a18295e6d987cee3
>
> Signed-off-by: Sajid Dalvi <sdalvi@google.com>
> Signed-off-by: Will McVicker <willmcvicker@google.com>
> ---
> drivers/pci/pci.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index 95bc329e74c0..5ae5b3c4dc9b 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -72,7 +72,8 @@ static void pci_dev_d3_sleep(struct pci_dev *dev)
> delay = pci_pm_d3hot_delay;
>
> if (delay)
> - msleep(delay);
> + usleep_range(delay * USEC_PER_MSEC,
> + (delay + 2) * USEC_PER_MSEC);

You could also use fsleep(), which ends up calling usleep_range()
for (usecs > 10 && usecs <= 20000).

\
 
 \ /
  Last update: 2022-08-16 23:07    [W:0.082 / U:1.956 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site