lkml.org 
[lkml]   [2022]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 05/35] drm/connector: Add TV standard property
Hi Geert,

On Fri, Aug 12, 2022 at 03:25:18PM +0200, Geert Uytterhoeven wrote:
> > --- a/drivers/gpu/drm/drm_connector.c
> > +++ b/drivers/gpu/drm/drm_connector.c
> > @@ -1649,11 +1650,40 @@ EXPORT_SYMBOL(drm_mode_create_tv_margin_properties);
> > * 0 on success or a negative error code on failure.
> > */
> > int drm_mode_create_tv_properties(struct drm_device *dev,
> > + unsigned int supported_tv_norms,
> > unsigned int num_modes,
> > const char * const modes[])
> > {
> > + static const struct drm_prop_enum_list tv_norm_values[] = {
> > + { __builtin_ffs(DRM_MODE_TV_NORM_NTSC_443) - 1, "NTSC-443" },
> > + { __builtin_ffs(DRM_MODE_TV_NORM_NTSC_J) - 1, "NTSC-J" },
> > + { __builtin_ffs(DRM_MODE_TV_NORM_NTSC_M) - 1, "NTSC-M" },
> > + { __builtin_ffs(DRM_MODE_TV_NORM_PAL_60) - 1, "PAL-60" },
> > + { __builtin_ffs(DRM_MODE_TV_NORM_PAL_B) - 1, "PAL-B" },
> > + { __builtin_ffs(DRM_MODE_TV_NORM_PAL_D) - 1, "PAL-D" },
> > + { __builtin_ffs(DRM_MODE_TV_NORM_PAL_G) - 1, "PAL-G" },
> > + { __builtin_ffs(DRM_MODE_TV_NORM_PAL_H) - 1, "PAL-H" },
> > + { __builtin_ffs(DRM_MODE_TV_NORM_PAL_I) - 1, "PAL-I" },
> > + { __builtin_ffs(DRM_MODE_TV_NORM_PAL_M) - 1, "PAL-M" },
> > + { __builtin_ffs(DRM_MODE_TV_NORM_PAL_N) - 1, "PAL-N" },
> > + { __builtin_ffs(DRM_MODE_TV_NORM_PAL_NC) - 1, "PAL-Nc" },
> > + { __builtin_ffs(DRM_MODE_TV_NORM_SECAM_60) - 1, "SECAM-60" },
> > + { __builtin_ffs(DRM_MODE_TV_NORM_SECAM_B) - 1, "SECAM-B" },
> > + { __builtin_ffs(DRM_MODE_TV_NORM_SECAM_D) - 1, "SECAM-D" },
> > + { __builtin_ffs(DRM_MODE_TV_NORM_SECAM_G) - 1, "SECAM-G" },
> > + { __builtin_ffs(DRM_MODE_TV_NORM_SECAM_K) - 1, "SECAM-K" },
> > + { __builtin_ffs(DRM_MODE_TV_NORM_SECAM_K1) - 1, "SECAM-K1" },
> > + { __builtin_ffs(DRM_MODE_TV_NORM_SECAM_L) - 1, "SECAM-L" },
>
> The above are analog standards, with a variable horizontal resolution.
>
> > + { __builtin_ffs(DRM_MODE_TV_NORM_HD480I) - 1, "hd480i" },
> > + { __builtin_ffs(DRM_MODE_TV_NORM_HD480P) - 1, "hd480p" },
> > + { __builtin_ffs(DRM_MODE_TV_NORM_HD576I) - 1, "hd576i" },
> > + { __builtin_ffs(DRM_MODE_TV_NORM_HD576P) - 1, "hd576p" },
> > + { __builtin_ffs(DRM_MODE_TV_NORM_HD720P) - 1, "hd720p" },
> > + { __builtin_ffs(DRM_MODE_TV_NORM_HD1080I) - 1, "hd1080i" },
>
> The above are digital standards, with a fixed resolution.

Are they?

It's not clear to me from looking at nouveau, but I was under the
impression that they were modes for a component output, so CEA 770.3. I
don't have the spec though, so I can't check.

> You seem to have missed "hd1080p"?

Nobody is using it. If we ever have a driver that uses it I think we can
add it.

> In addition, "hd720p", "hd080i", and "hd1080p" are available in both 50
> and 60 (actually 59.94) Hz, while "hd1080p" can also use 24 or 25 Hz.

It looks like nouveau only exposes modes for 480p at 59.94Hz, 576p at
50Hz, 720p at 60Hz, 1080i at 30Hz.

> Either you have to add them here (e.g. "hd720p50" and "hd720p60"), or
> handle them through "@<refresh>". The latter would impact "[PATCH v1
> 09/35] drm/modes: Move named modes parsing to a separate function", as
> currently a named mode and a refresh rate can't be specified both.

I think the former would make more sense. It simplifies a bit the
parser, and we're going to use a named mode anyway.

> As "[PATCH v1 34/35] drm/modes: Introduce the tv_mode property as a
> command-line option" uses a separate "tv_mode" option, and not the main
> mode name, I think you want to add them here.

It's a separate story I think, we could have a named mode hd720p50,
which would be equivalent to 1280x720,tv_mode=hd720p

Maxime
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2022-08-16 15:22    [W:1.476 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site