lkml.org 
[lkml]   [2022]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH V2 0/7] i2c-imx-lpi2c: add IPG clock
Date
From: Peng Fan <peng.fan@nxp.com>

V2:
use clk bulk API in driver to support backward compatibility.
Include a new patch, patch 1.

The i.MX LPI2C needs PER and IPG clock, not just PER or IPG clock.
The current driver/dts/bindings use one CLK. Although it works with
with upstream kernel, but it not match the hardware design. If IPG
clock is disabled, the LPI2C will not work.

There are changes made to ARM32 i.MX7ULP dts, ARM64 i.MX8 dts, dt-bindings,
and the lpi2c driver.

The driver is updated to use bulk clk API to avoid break backward
compatibility. But it is hard to avoid dtbs_check pass, because the dts
and binding update are in separate patches.

Peng Fan (7):
ARM: dts: imx7ulp: update the LPI2C clock-names
dt-bindings: i2c: i2c-imx-lpi2c: add ipg clk
dt-bindings: i2c: i2c-imx-lpi2c: add dmas property
dt-bindings: i2c: i2c-imx-lpi2c: add i.MX93
arm64: dts: imx8-ss-dma: add IPG clock for i2c
ARM: dts: imx7ulp: Add IPG clock for lpi2c
i2c: imx-lpi2c: use bulk clk API

.../bindings/i2c/i2c-imx-lpi2c.yaml | 20 +++++++++++++---
arch/arm/boot/dts/imx7ulp.dtsi | 10 ++++----
.../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 20 +++++++++-------
drivers/i2c/busses/i2c-imx-lpi2c.c | 24 +++++++++----------
4 files changed, 47 insertions(+), 27 deletions(-)

--
2.37.1

\
 
 \ /
  Last update: 2022-08-16 14:55    [W:0.292 / U:0.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site