lkml.org 
[lkml]   [2022]   [Aug]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] ARM: dts: kirkwood: lsxl: remove first ethernet port
Date
Both the Linkstation LS-CHLv2 and the LS-XHL have only one ethernet
port. This has always been wrong, i.e. the board code used to set up
both ports, but the driver will play nice and return -ENODEV if the
assiciated PHY is not found. Nevertheless, it is wrong. Remove it.

Fixes: 876e23333511 ("ARM: kirkwood: add gigabit ethernet and mvmdio device tree nodes")
Signed-off-by: Michael Walle <michael@walle.cc>
---
arch/arm/boot/dts/kirkwood-lsxl.dtsi | 11 -----------
1 file changed, 11 deletions(-)

diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
index 321a40a98ed2..88b70ba1c8fe 100644
--- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
@@ -218,22 +218,11 @@ hdd_power: regulator@2 {
&mdio {
status = "okay";

- ethphy0: ethernet-phy@0 {
- reg = <0>;
- };
-
ethphy1: ethernet-phy@8 {
reg = <8>;
};
};

-&eth0 {
- status = "okay";
- ethernet0-port@0 {
- phy-handle = <&ethphy0>;
- };
-};
-
&eth1 {
status = "okay";
ethernet1-port@0 {
--
2.30.2
\
 
 \ /
  Last update: 2022-08-16 05:40    [W:0.068 / U:1.624 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site