lkml.org 
[lkml]   [2022]   [Aug]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 5.15 440/779] clk: qcom: camcc-sm8250: Fix halt on boot by reducing drivers init level
    Date
    From: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>

    [ Upstream commit c4f40351901a10cd662ac2c081396d8fb04f584d ]

    Access to I/O of SM8250 camera clock controller IP depends on enabled
    GCC_CAMERA_AHB_CLK clock supplied by global clock controller, the latter
    one is inited on subsys level, so, to satisfy the dependency, it would
    make sense to deprive the init level of camcc-sm8250 driver.

    If both drivers are compiled as built-in, there is a change that a board
    won't boot up due to a race, which happens on the same init level.

    Fixes: 5d66ca79b58c ("clk: qcom: Add camera clock controller driver for SM8250")
    Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
    Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
    Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
    Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
    Link: https://lore.kernel.org/r/20220518103554.949511-1-vladimir.zapolskiy@linaro.org
    Signed-off-by: Sasha Levin <sashal@kernel.org>
    ---
    drivers/clk/qcom/camcc-sm8250.c | 12 +-----------
    1 file changed, 1 insertion(+), 11 deletions(-)

    diff --git a/drivers/clk/qcom/camcc-sm8250.c b/drivers/clk/qcom/camcc-sm8250.c
    index 439eaafdcc86..ae4e9774f36e 100644
    --- a/drivers/clk/qcom/camcc-sm8250.c
    +++ b/drivers/clk/qcom/camcc-sm8250.c
    @@ -2440,17 +2440,7 @@ static struct platform_driver cam_cc_sm8250_driver = {
    },
    };

    -static int __init cam_cc_sm8250_init(void)
    -{
    - return platform_driver_register(&cam_cc_sm8250_driver);
    -}
    -subsys_initcall(cam_cc_sm8250_init);
    -
    -static void __exit cam_cc_sm8250_exit(void)
    -{
    - platform_driver_unregister(&cam_cc_sm8250_driver);
    -}
    -module_exit(cam_cc_sm8250_exit);
    +module_platform_driver(cam_cc_sm8250_driver);

    MODULE_DESCRIPTION("QTI CAMCC SM8250 Driver");
    MODULE_LICENSE("GPL v2");
    --
    2.35.1


    \
     
     \ /
      Last update: 2022-08-15 21:13    [W:4.484 / U:0.464 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site