lkml.org 
[lkml]   [2022]   [Aug]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH net 1/2] dt: ar803x: Document disable-hibernation property
Date


> -----Original Message-----
> From: Andrew Lunn <andrew@lunn.ch>
> Sent: 2022年8月12日 22:15
> To: Wei Fang <wei.fang@nxp.com>
> Cc: hkallweit1@gmail.com; linux@armlinux.org.uk; davem@davemloft.net;
> edumazet@google.com; kuba@kernel.org; pabeni@redhat.com;
> robh+dt@kernel.org; krzysztof.kozlowski+dt@linaro.org; f.fainelli@gmail.com;
> netdev@vger.kernel.org; devicetree@vger.kernel.org;
> linux-kernel@vger.kernel.org
> Subject: Re: [PATCH net 1/2] dt: ar803x: Document disable-hibernation property
>
> On Sat, Aug 13, 2022 at 12:50:08AM +1000, wei.fang@nxp.com wrote:
> > From: Wei Fang <wei.fang@nxp.com>
> >
> > The hibernation mode of Atheros AR803x PHYs is default enabled.
> > When the cable is unplugged, the PHY will enter hibernation mode and
> > the PHY clock does down. For some MACs, it needs the clock to support
> > it's logic. For instance, stmmac needs the PHY inputs clock is present
> > for software reset completion. Therefore, It is reasonable to add a DT
> > property to disable hibernation mode.
>
> It is not the first time we have seen this. What you should really be
> concentrating on is the clock out. That is what the MAC requires here.
>
> You already have the property qca,clk-out-frequency. You could maybe piggy
> back off this. If that property is being used, you know the clock output is used. So
> you should do what is needed to keep it ticking.
>
> You also have qca,keep-pll-enabled:
>
> If set, keep the PLL enabled even if there is no link. Useful if you
> want to use the clock output without an ethernet link.
>
> To me, it seems like you already have enough properties, you just need to imply
> that you need to disable hibernation in order to fulfil these properties.
>
> Andrew

Hi Andrew,

Your suggestion is indeed an effective solution, but I checked both the datasheet
and the driver of AR803x PHYs and found that the qca,clk-out-frequency and the
qca,keep-pll-enabled properties are associated with the CLK_25M pin of AR803x PHYs.
But there is a case that CLK_25M pin is not used on some platforms.
Taking our i.MX8DXL platform as an example, the stmmac and AR8031 PHY are applied
on this platform, but the CLK_25M pin of AR8031 is not used. So when I used the method
you mentioned above, it did not work as expected. In this case, we can only disable the
hibernation mode of AR803x PHYs and keep the RX_CLK always outputting a valid clock
so that the stmmac can complete the software reset operation.

\
 
 \ /
  Last update: 2022-08-15 08:50    [W:0.127 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site