lkml.org 
[lkml]   [2022]   [Aug]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH] Soundwire: Initialize multi_link with fwnode props
On Mon, Aug 15, 2022 at 10:08:07AM +0600, Khalid Masum wrote:
> On 8/14/22 15:45, Greg KH wrote:
> > On Sun, Aug 14, 2022 at 02:04:15PM +0600, Khalid Masum wrote:
> > > According to the TODO, In sw_bus_master_add, bus->multi_link is to be
> > > populated with properties from FW node props. Make this happen by
> > > creating a new fwnode_handle flag FWNODE_FLAG_MULTI_LINKED and use
> > > the flag to store the multi_link value from intel_link_startup. Use
> > > this flag to initialize bus->multi_link.
> > >
> > > Signed-off-by: Khalid Masum <khalid.masum.92@gmail.com>
> > > ---
> > > I do not think adding a new flag for fwnode_handle is a good idea.
> > > So, what would be the best way to initialize bus->multilink with
> > > fwnode props?
> > >
> > > -- Khalid Masum
> > >
> > > drivers/soundwire/bus.c | 4 ++--
> > > drivers/soundwire/intel.c | 1 +
> > > include/linux/fwnode.h | 1 +
> > > 3 files changed, 4 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c
> > > index a2bfb0434a67..80df1672c60b 100644
> > > --- a/drivers/soundwire/bus.c
> > > +++ b/drivers/soundwire/bus.c
> > > @@ -74,9 +74,9 @@ int sdw_bus_master_add(struct sdw_bus *bus, struct device *parent,
> > > /*
> > > * Initialize multi_link flag
> > > - * TODO: populate this flag by reading property from FW node
> > > */
> > > - bus->multi_link = false;
> > > + bus->multi_link = (fwnode->flags & FWNODE_FLAG_MULTI_LINKED)
> > > + == FWNODE_FLAG_MULTI_LINKED;

I missed that this was an if statement here, please write this to be
more obvious and readable.

> > > if (bus->ops->read_prop) {
> > > ret = bus->ops->read_prop(bus);
> > > if (ret < 0) {
> > > diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c
> > > index 505c5ef061e3..034d1c523ddf 100644
> > > --- a/drivers/soundwire/intel.c
> > > +++ b/drivers/soundwire/intel.c
> > > @@ -1347,6 +1347,7 @@ int intel_link_startup(struct auxiliary_device *auxdev)
> > > */
> > > bus->multi_link = true;
> > > bus->hw_sync_min_links = 1;
> > > + dev->fwnode->flags |= FWNODE_FLAG_MULTI_LINKED;
> > > }
> > > /* Initialize shim, controller */
> > > diff --git a/include/linux/fwnode.h b/include/linux/fwnode.h
> > > index 9a81c4410b9f..446a52744953 100644
> > > --- a/include/linux/fwnode.h
> > > +++ b/include/linux/fwnode.h
> > > @@ -32,6 +32,7 @@ struct device;
> > > #define FWNODE_FLAG_NOT_DEVICE BIT(1)
> > > #define FWNODE_FLAG_INITIALIZED BIT(2)
> > > #define FWNODE_FLAG_NEEDS_CHILD_BOUND_ON_ADD BIT(3)
> > > +#define FWNODE_FLAG_MULTI_LINKED BIT(4)
> >
> > What does this commit actually change?
>
> The new flag will lets us save if the device has multilink in fwnode_handle
> whenever needed.
> Then for soundwire/intel, save the multi_link flag into fwnode during
> startup.
> Later at master_add, as written in todo, initialize the multilink flag with
> fwnode's flag property.

And what does that allow to happen? What changes with all of this?

thanks,

greg k-h

\
 
 \ /
  Last update: 2022-08-15 08:38    [W:0.094 / U:1.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site