lkml.org 
[lkml]   [2022]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/2] iio: Add single and double tap events support
Date
This patch series adds new event type for tap called gesture and direction
is used to differentiate single and double tap. This series adds single
and double tap support for bma400 accelerometer device driver.

Changes since v1
1. Included headers in alphabetical order.
2. Changing tap_event_en variable name to tap_event_en_bitmask since it is
used in bit manipulation operation.
3. Assigning boolean value to step_event_en and activity_event_en instead
of 0, since they are boolean type members.
4. Using local variable for regmap_read() instead for *val itself.
5. Correcting typos.
6. Remove of IIO_EV_INFO_PERIOD.
7. Now all 4 tap controls like threshold, quiet, tics_dt and quiet_dt can
be configured from the userspace.
8. Introducing new event info IIO_EV_INFO_RESET_TIMEOUT, and
IIO_EV_INFO_TAP_2MIN_DELAY into iio_event_info.
9. Creating custom read/write attributes for tics_dt called
in_accel_gesture_maxtomin_time.
10. Time based tap controls can be configured in seconds instead of raw
values.
11. Provided all available values for time base tap controls in seconds.
12. Adding one more MODULE_AUTHOR().

Changes since RFC
1. Corrected the "quite" typo to "quiet".
2. Added proper reference and name of the section from datasheet.
3. Changed the ABI documentation to make it more generic.
4. Added ABI documentation for double tap quiet period.
5. Added available list by registering new event attribute for tap
threshold values and double tap quiet period values.
6. Sending both single and double tap events separately.
8. Removed checking for tap enabled while changing data rate.
9. Returning invalid with error message if the input data rate is not
200Hz while enabling tap interrupts.
7. Added datasheet reference for interrupt engine overrun.

Jagath Jog J (2):
iio: Add new event type gesture and use direction for single and
double tap
iio: accel: bma400: Add support for single and double tap events

Documentation/ABI/testing/sysfs-bus-iio | 41 +++
drivers/iio/accel/bma400.h | 13 +
drivers/iio/accel/bma400_core.c | 337 +++++++++++++++++++++++-
drivers/iio/industrialio-event.c | 7 +-
include/linux/iio/types.h | 2 +
include/uapi/linux/iio/types.h | 3 +
tools/iio/iio_event_monitor.c | 8 +-
7 files changed, 399 insertions(+), 12 deletions(-)


base-commit: 180c6cb6b9b79c55b79e8414f4c0208f2463af7d
--
2.17.1

\
 
 \ /
  Last update: 2022-08-13 09:18    [W:0.123 / U:0.836 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site