lkml.org 
[lkml]   [2022]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 2/3] Documentation: ABI: add sysfs-bus-counter-ecap
On Wed, Aug 10, 2022 at 04:07:23PM +0200, Julien Panis wrote:
> This commit adds an ABI file for TI ECAP used in capture operating mode.
>
> Signed-off-by: Julien Panis <jpanis@baylibre.com>

Hi Julien,

Duplicate ABIs are no longer valid, so we consolidated the Counter sysfs
attributes documentation to a single sysfs-bus-counter file in commit
769841c966fd. You can document the new sysfs attributes you introduce
for the TI eCAP counter driver to that sysfs-bus-counter file as well.

William Breathitt Gray

> ---
> .../ABI/testing/sysfs-bus-counter-ecap | 64 +++++++++++++++++++
> 1 file changed, 64 insertions(+)
> create mode 100644 Documentation/ABI/testing/sysfs-bus-counter-ecap
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-counter-ecap b/Documentation/ABI/testing/sysfs-bus-counter-ecap
> new file mode 100644
> index 000000000000..ca530a6806de
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-bus-counter-ecap
> @@ -0,0 +1,64 @@
> +What: /sys/bus/counter/devices/counter0/signal0/polarity1
> +What: /sys/bus/counter/devices/counter0/signal0/polarity2
> +What: /sys/bus/counter/devices/counter0/signal0/polarity3
> +What: /sys/bus/counter/devices/counter0/signal0/polarity4
> +KernelVersion: 5.19
> +Contact: jpanis@baylibre.com
> +Description:
> + ECAP module includes 4 timestamp capture registers.
> + For all 4 sequenced timestamp capture events (1->2->3->4->1->...),
> + edge polarity can be selected. Then, each capture register can be
> + tuned to capture event by either:
> +
> + - "rising"
> + - "falling"
> +
> + Reading returns current trigger polarity.
> +
> + Writing value before enabling capture sets trigger polarity.
> +
> +What: /sys/bus/counter/devices/counter0/signal0/polarity1_available
> +What: /sys/bus/counter/devices/counter0/signal0/polarity2_available
> +What: /sys/bus/counter/devices/counter0/signal0/polarity3_available
> +What: /sys/bus/counter/devices/counter0/signal0/polarity4_available
> +KernelVersion: 5.19
> +Contact: jpanis@baylibre.com
> +Description:
> + Discrete set of available values for the respective polarity X
> + configuration are listed in this file. Values are delimited by
> + newline characters.
> +
> +What: /sys/bus/counter/devices/counter0/count0/enable
> +KernelVersion: 5.19
> +Contact: jpanis@baylibre.com
> +Description:
> + Whether ECAP is enabled. Valid attribute values are boolean.
> +
> + This attribute is intended to serve as a start/stop mechanism
> + for ECAP.
> +
> +What: /sys/bus/counter/devices/counter0/count0/count
> +KernelVersion: 5.19
> +Contact: jpanis@baylibre.com
> +Description:
> + Read-only attribute that indicates the current base counter value.
> +
> +What: /sys/bus/counter/devices/counter0/count0/capture1
> +What: /sys/bus/counter/devices/counter0/count0/capture2
> +What: /sys/bus/counter/devices/counter0/count0/capture3
> +What: /sys/bus/counter/devices/counter0/count0/capture4
> +KernelVersion: 5.19
> +Contact: jpanis@baylibre.com
> +Description:
> + Read-only attributes that indicate the last timestamp captured
> + for the respective capture X register.
> +
> +What: /sys/bus/counter/devices/counter0/count0/capture1_component_id
> +What: /sys/bus/counter/devices/counter0/count0/capture2_component_id
> +What: /sys/bus/counter/devices/counter0/count0/capture3_component_id
> +What: /sys/bus/counter/devices/counter0/count0/capture4_component_id
> +KernelVersion: 5.19
> +Contact: jpanis@baylibre.com
> +Description:
> + Read-only attributes that indicate the component ID of the
> + respective extension or synapse.
> --
> 2.25.1
>
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2022-08-14 00:49    [W:1.343 / U:0.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site