lkml.org 
[lkml]   [2022]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/6] arm64: dts: imx8mp-venice-gw74xx: fix CAN STBY polarity
On Fri, Aug 12, 2022 at 10:51 AM Fabio Estevam <festevam@gmail.com> wrote:
>
> Hi Tim,
>
> On Fri, Aug 12, 2022 at 2:35 PM Tim Harvey <tharvey@gateworks.com> wrote:
>
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
> > index 521215520a0f..de17021df53f 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
> > @@ -123,8 +123,8 @@ reg_can2_stby: regulator-can2-stby {
> > pinctrl-names = "default";
> > pinctrl-0 = <&pinctrl_reg_can>;
> > regulator-name = "can2_stby";
> > - gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
> > - enable-active-high;
> > + gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
> > + enable-active-low;
>
> This 'enable-active-low' property does not exist. Just remove it.

Fabio,

Thanks - I see now that for active-low you just omit the
'enable-active-high' prop. I will send a new version.

Thanks,

Tim

\
 
 \ /
  Last update: 2022-08-12 20:52    [W:0.095 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site