lkml.org 
[lkml]   [2022]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/6] arm64: dts: imx8mp-venice-gw74xx: fix CAN STBY polarity
Hi Tim,

On Fri, Aug 12, 2022 at 2:35 PM Tim Harvey <tharvey@gateworks.com> wrote:

> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
> index 521215520a0f..de17021df53f 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
> @@ -123,8 +123,8 @@ reg_can2_stby: regulator-can2-stby {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_reg_can>;
> regulator-name = "can2_stby";
> - gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
> - enable-active-high;
> + gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
> + enable-active-low;

This 'enable-active-low' property does not exist. Just remove it.

\
 
 \ /
  Last update: 2022-08-12 19:51    [W:0.085 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site