lkml.org 
[lkml]   [2022]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] arm64: dts: qcom: pm6350: add temp sensor and thermal zone config
From
On 12/08/2022 14:44, Luca Weiss wrote:
> Add temp-alarm device tree node and a default configuration for the
> corresponding thermal zone for this PMIC. Temperatures are based on
> downstream values.
>
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---
> With this config I'm getting this in dmesg, not sure if it's a warning
> that should be solved or just an informative warning.
>
> [ 0.268256] spmi-temp-alarm c440000.spmi:pmic@0:temp-alarm@2400: No ADC is configured and critical temperature is above the maximum stage 2 threshold of 140 C! Configuring stage 2 shutdown at 140 C.
>
> As far as I can tell, based on downstream dts this PMIC doesn't have an
> ADC.

You configure 145 and driver believes 140 is the limit, so it seems
warning should be addressed.

From where did you get 145 degrees as limit? Downstream DTS?

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-08-12 15:37    [W:1.713 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site