lkml.org 
[lkml]   [2022]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH V2] Input: synaptics-rmi4 - filter incomplete relative packet.
From
Hi,

On 8/12/22 10:43, margeyang wrote:
> From: Marge Yang <marge.yang@synaptics.corp-partner.google.com>
>
> RMI4 F03 supports the Stick function,
> it's designed to support relative packet.
> This patch supports the following case.
> When relative packet can't be reported completely,
> it may miss one byte or two byte.
> New Synaptics firmware will report PARITY error.
> When timeout error or parity error happens,
> RMI4 driver will sends 0xFE command and
> ask FW to Re-send stick packet again.
>
> Signed-off-by: Marge Yang<marge.yang@synaptics.corp-partner.google.com>
> ---
> drivers/input/rmi4/rmi_f03.c | 83 ++++++++++++++++++++++++++++++++++--
> 1 file changed, 79 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/input/rmi4/rmi_f03.c b/drivers/input/rmi4/rmi_f03.c
> index c194b1664b10..56b3e1129b51 100644
> --- a/drivers/input/rmi4/rmi_f03.c
> +++ b/drivers/input/rmi4/rmi_f03.c
> @@ -23,8 +23,12 @@
> #define RMI_F03_BYTES_PER_DEVICE_SHIFT 4
> #define RMI_F03_QUEUE_LENGTH 0x0F
>
> +#define RMI_F03_RESET_STYK 0xFE
> +
> #define PSMOUSE_OOB_EXTRA_BTNS 0x01
>
> +#define RELATIVE_PACKET_SIZE 3
> +
> struct f03_data {
> struct rmi_function *fn;
>
> @@ -33,6 +37,11 @@ struct f03_data {
>
> unsigned int overwrite_buttons;
>
> + int iwritecommandcounter;
> + unsigned int ipacketindex;
> + unsigned int serio_flagsArry[RELATIVE_PACKET_SIZE];
> + u8 ob_dataArry[RELATIVE_PACKET_SIZE];
> +
> u8 device_count;
> u8 rx_queue_length;
> };
> @@ -87,7 +96,7 @@ static int rmi_f03_pt_write(struct serio *id, unsigned char val)
> __func__, error);
> return error;
> }
> -

Please keep the empty line you are removing here.

> + f03->iwritecommandcounter++;
> return 0;
> }
>
> @@ -106,7 +115,8 @@ static int rmi_f03_initialize(struct f03_data *f03)
> dev_err(dev, "Failed to read query register (%d).\n", error);
> return error;
> }
> -

Please keep the empty line you are removing here.

(in general don't make any whitespace changes unrelated to your
changes. So if your changes are only adding code, don't delete
any whitespace)

> + f03->iwritecommandcounter = 0;
> + f03->ipacketindex = 0;
> f03->device_count = query1 & RMI_F03_DEVICE_COUNT;
> bytes_per_device = (query1 >> RMI_F03_BYTES_PER_DEVICE_SHIFT) &
> RMI_F03_BYTES_PER_DEVICE;
> @@ -284,6 +294,22 @@ static irqreturn_t rmi_f03_attention(int irq, void *ctx)
> ob_data = obs[i + RMI_F03_OB_DATA_OFFSET];
> serio_flags = 0;
>
> + if (ob_status & (RMI_F03_OB_FLAG_TIMEOUT | RMI_F03_OB_FLAG_PARITY)) {
> + // Send resend command to stick when timeout or parity error.
> + // Driver can receive the last stick packet.
> +
> + error = rmi_write(f03->fn->rmi_dev, f03->fn->fd.data_base_addr,
> + RMI_F03_RESET_STYK);

please align the start of "RMI_F03_RESET_STYK" with the '(' of "rmi_write(".


> + if (error) {
> + dev_err(&f03->fn->dev,
> + "%s: Failed to rmi_write to F03 TX register (%d).\n",
> + __func__, error);
> + return error;
> + }
> + f03->ipacketindex = 0;
> + break;
> + }
> +
> if (!(ob_status & RMI_F03_RX_DATA_OFB))
> continue;
>
> @@ -298,9 +324,58 @@ static irqreturn_t rmi_f03_attention(int irq, void *ctx)
> serio_flags & SERIO_TIMEOUT ? 'Y' : 'N',
> serio_flags & SERIO_PARITY ? 'Y' : 'N');
>
> - serio_interrupt(f03->serio, ob_data, serio_flags);
> + if (f03->iwritecommandcounter > 0) {
> + // Read Acknowledge Byte after writing the PS2 command.
> + // It is not trackpoint data.
> + serio_interrupt(f03->serio, ob_data, serio_flags);
> +

Why the extra empty line here? please drop this.

> + } else {
> + // The relative-mode PS/2 packet format is as follows:
> + //
> + // bit position position (as array of bytes)
> + // 7 6 5 4 3 2 1 0
> + // =================================+
> + // Yov Xov DY8 DX8 1 M R L | DATA[0]
> + // DX[7:0] | DATA[1]
> + // DY[7:0] | DATA[2]
> + // =================================+
> + // Yov: Y overflow
> + // Xov: X overflow
> + if ((f03->ipacketindex == 0) && (ob_data & ((BIT(7)|BIT(6))))) {
> + dev_err(&f03->fn->dev,
> + "%s: X or Y is overflow. (%x)\n",
> + __func__, ob_data);
> + goto exit;

You can just use break; here as you did before, please switch back to break;

> + } else if ((f03->ipacketindex == 0) && !(ob_data & BIT(3))) {
> + dev_err(&f03->fn->dev,
> + "%s: New BIT 3 is not 1 for the first byte\n",
> + __func__);
> + goto exit;

You can just use break; here as you did before, please switch back to break;

> + } else {
> + if (f03->ipacketindex >= RELATIVE_PACKET_SIZE)
> + f03->ipacketindex = 0;
> +
> + f03->ob_dataArry[f03->ipacketindex] = ob_data;
> + f03->serio_flagsArry[f03->ipacketindex] = serio_flags;
> + f03->ipacketindex++;
> +
> + if (f03->ipacketindex == RELATIVE_PACKET_SIZE) {
> + serio_interrupt(f03->serio, f03->ob_dataArry[0],
> + f03->serio_flagsArry[0]);
> + serio_interrupt(f03->serio, f03->ob_dataArry[1],
> + f03->serio_flagsArry[1]);
> + serio_interrupt(f03->serio, f03->ob_dataArry[2],
> + f03->serio_flagsArry[2]);
> + f03->ipacketindex = 0;
> + }
> + }
> + }
> + }
> +exit:
> + if (f03->iwritecommandcounter > 0) {
> + f03->ipacketindex = 0;
> + f03->iwritecommandcounter = f03->iwritecommandcounter - 1;
> }
> -

Please keep the empty line you are removing here.

> return IRQ_HANDLED;
> }
>

Other then the few minor style issues above this looks good to me.

Regards,

Hans

\
 
 \ /
  Last update: 2022-08-12 12:39    [W:0.108 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site