lkml.org 
[lkml]   [2022]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] PCI: mvebu: Fix endianity when accessing pci emul bridge members
Date
PCI emul bridge members iolimitupper, iobaseupper, memlimit and membase are
of type __le16, so correctly access these members via le16_to_cpu() macros.

Fixes: 4ded69473adb ("PCI: mvebu: Propagate errors when updating PCI_IO_BASE and PCI_MEM_BASE registers")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
---
drivers/pci/controller/pci-mvebu.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
index c1ffdb06c971..00ea0836b81a 100644
--- a/drivers/pci/controller/pci-mvebu.c
+++ b/drivers/pci/controller/pci-mvebu.c
@@ -523,7 +523,7 @@ static int mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)

/* Are the new iobase/iolimit values invalid? */
if (conf->iolimit < conf->iobase ||
- conf->iolimitupper < conf->iobaseupper)
+ le16_to_cpu(conf->iolimitupper) < le16_to_cpu(conf->iobaseupper))
return mvebu_pcie_set_window(port, port->io_target, port->io_attr,
&desired, &port->iowin);

@@ -535,10 +535,10 @@ static int mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
* is the CPU address.
*/
desired.remap = ((conf->iobase & 0xF0) << 8) |
- (conf->iobaseupper << 16);
+ le16_to_cpu(conf->iobaseupper << 16);
desired.base = port->pcie->io.start + desired.remap;
desired.size = ((0xFFF | ((conf->iolimit & 0xF0) << 8) |
- (conf->iolimitupper << 16)) -
+ le16_to_cpu(conf->iolimitupper << 16)) -
desired.remap) +
1;

@@ -552,7 +552,7 @@ static int mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
struct pci_bridge_emul_conf *conf = &port->bridge.conf;

/* Are the new membase/memlimit values invalid? */
- if (conf->memlimit < conf->membase)
+ if (le16_to_cpu(conf->memlimit) < le16_to_cpu(conf->membase))
return mvebu_pcie_set_window(port, port->mem_target, port->mem_attr,
&desired, &port->memwin);

@@ -562,8 +562,8 @@ static int mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
* window to setup, according to the PCI-to-PCI bridge
* specifications.
*/
- desired.base = ((conf->membase & 0xFFF0) << 16);
- desired.size = (((conf->memlimit & 0xFFF0) << 16) | 0xFFFFF) -
+ desired.base = ((le16_to_cpu(conf->membase) & 0xFFF0) << 16);
+ desired.size = (((le16_to_cpu(conf->memlimit) & 0xFFF0) << 16) | 0xFFFFF) -
desired.base + 1;

return mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, &desired,
--
2.20.1
\
 
 \ /
  Last update: 2022-08-12 11:42    [W:0.046 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site