lkml.org 
[lkml]   [2022]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2] Introduce sysfs interface to disable kfence for selected slabs.
On Thu, 11 Aug 2022 at 17:10, Imran Khan <imran.f.khan@oracle.com> wrote:
>
> Hello Marco,
>
> On 11/8/22 11:21 pm, Marco Elver wrote:
> > On Thu, 11 Aug 2022 at 12:07, <vbabka@suse.cz> wrote:
> > [...]
> >>> new flag SLAB_SKIP_KFENCE, it also can serve a dual purpose, where
> >>> someone might want to explicitly opt out by default and pass it to
> >>> kmem_cache_create() (for whatever reason; not that we'd encourage
> >>> that).
> >>
> >> Right, not be able to do that would be a downside (although it should be
> >> possible even with opt-in to add an opt-out cache flag that would just make
> >> sure the opt-in flag is not set even if eligible by global defaults).
> >
> > True, but I'd avoid all this unnecessary complexity if possible.
> >
> >>> I feel that the real use cases for selectively enabling caches for
> >>> KFENCE are very narrow, and a design that introduces lots of
> >>> complexity elsewhere, just to support this feature cannot be justified
> >>> (which is why I suggested the simpler design here back in
> >>> https://urldefense.com/v3/__https://lore.kernel.org/lkml/CANpmjNNmD9z7oRqSaP72m90kWL7jYH*cxNAZEGpJP8oLrDV-vw@mail.gmail.com/__;Kw!!ACWV5N9M2RV99hQ!Oh4PBJ1NoN9mEgqGqdaNcWuKtJiC6TS_rIbALuqZadQoo93jpVJaFFmXUpOTuzRUdCwcRJWE6uJ4pe0$
> >>> )
> >>
> >> I don't mind strongly either way, just a suggestion to consider.
> >
> > While switching the semantics of the flag from opt-out to opt-in is
> > just as valid, I'm more comfortable with the opt-out flag: the rest of
> > the logic can stay the same, and we're aware of the fact that changing
> > cache coverage by KFENCE shouldn't be something that needs to be done
> > manually.
> >
> > My main point is that opting out or in to only a few select caches
> > should be a rarely used feature, and accordingly it should be as
> > simple as possible. Honestly, I still don't quite see the point of it,
> > and my solution would be to just increase the KFENCE pool, increase
> > sample rate, or decrease the "skip covered threshold%". But in the
> > case described by Imran, perhaps a running machine is having trouble
> > and limiting the caches to be analyzed by KFENCE might be worthwhile
> > if a more aggressive configuration doesn't yield anything (and then
> > there's of course KASAN, but I recognize it's not always possible to
> > switch kernel and run the same workload with it).
> >
> > The use case for the proposed change is definitely when an admin or
> > kernel dev is starting to debug a problem. KFENCE wasn't designed for
> > that (vs. deployment at scale, discovery of bugs). As such I'm having
> > a hard time admitting how useful this feature will really be, but
> > given the current implementation is simple, having it might actually
> > help a few people.
> >
> > Imran, just to make sure my assumptions here are right, have you had
> > success debugging an issue in this way? Can you elaborate on what
> > "certain debugging scenarios" you mean (admin debugging something, or
> > a kernel dev, production fleet, or test machine)?
> >
>
> I have not used kfence in this way because as of now we don't have such newer
> kernels in production fleet but I can cite a couple of instances where using
> slub_debug for few selected slabs helped me in locating the issue on a
> production system where KASAN or even full slub_debug were not feasible.
> Apologies in advance if I am elaborating more than you asked for :).

This is very useful to understand the use case.

> In one case a freed struct mutex was being used later on and by that time same
> address had been given to a kmalloc-32 object. The issue was appearing more
> frequently if one would enforce some cgroup memory limitation resulting in fork
> of a task exiting prematurely. From the vmcore we could see that mutex or more
> specifically task_struct.futex_exit_mutex was in bad shape and eventually using
> slub_debug for kmalloc-32 pointed to issue.
>
> Another case involved a mem_cgroup corruption which was causing system crash but
> was giving list corruption warnings beforehand. Since list corruption warnings
> were coming from cgroup subsystem, corresponding objects were in doubt.
> Enabling slub_debug for kmalloc-4k helped in locating the actual corruption.
>
> Admittedly both of the above issues were result of backporting mistakes but
> nonetheless they happened in production systems where very few debugging options
> were available.
>
> By "certain debugging scenarios" I meant such cases where some initial data
> (from production fleet) like vmcore or kernel debug messages can give some
> pointer towards which slab objects could be wrong and then we would use this
> feature (along with further tuning like increasing sampling frequency, pool size
> if needed/possible) to pinpoint the actual issue. The idea is that limiting
> KFENCE to few slabs will increase the probablity of catching the issue even if
> we are not able to tweak pool size.
>
> Please let me know if it sounds reasonable or if I missed something from your
> query.

Thanks for the elaboration on use cases - agreed that in few scenarios
this feature can help increase the probability of debugging an issue.

Reviewed-by: Marco Elver <elver@google.com>

With minor suggestions:

> +SLAB_ATTR(skip_kfence);
> +

^ Unnecessary space between SLAB_ATTR and #endif.

> +#endif
> +

And the patch title should be something like "kfence: add sysfs
interface to disable kfence for selected slabs" (to follow format
"<subsys>: <thing changed>").

\
 
 \ /
  Last update: 2022-08-12 11:13    [W:0.050 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site