lkml.org 
[lkml]   [2022]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/4] gpio-f7188x: Add GPIO support for Nuvoton NCT6116
On Thu, Aug 11, 2022 at 05:39:05PM +0200, Henning Schild wrote:
> Add GPIO support for Nuvoton NCT6116 chip. Nuvoton SuperIO chips are
> very similar to the ones from Fintek. In other subsystems they also
> share drivers and are called a family of drivers.
>
> For the GPIO subsystem the only difference is that the direction bit is
> reversed and that there is only one data bit per pin. On the SuperIO
> level the logical device is another one.
>
> Signed-off-by: Henning Schild <henning.schild@siemens.com>
> ---
> drivers/gpio/gpio-f7188x.c | 71 +++++++++++++++++++++++++++-----------
> 1 file changed, 51 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/gpio/gpio-f7188x.c b/drivers/gpio/gpio-f7188x.c
> index 18a3147f5a42..7b05ecc611e9 100644
> --- a/drivers/gpio/gpio-f7188x.c
> +++ b/drivers/gpio/gpio-f7188x.c
> @@ -1,6 +1,7 @@
> // SPDX-License-Identifier: GPL-2.0-or-later
> /*
> * GPIO driver for Fintek Super-I/O F71869, F71869A, F71882, F71889 and F81866
> + * and Nuvoton Super-I/O NCT6116D
> *
> * Copyright (C) 2010-2013 LaCie
> *
> @@ -22,13 +23,12 @@
> #define SIO_LDSEL 0x07 /* Logical device select */
> #define SIO_DEVID 0x20 /* Device ID (2 bytes) */
> #define SIO_DEVREV 0x22 /* Device revision */
> -#define SIO_MANID 0x23 /* Fintek ID (2 bytes) */
>
> -#define SIO_LD_GPIO 0x06 /* GPIO logical device */
> #define SIO_UNLOCK_KEY 0x87 /* Key to enable Super-I/O */
> #define SIO_LOCK_KEY 0xAA /* Key to disable Super-I/O */
>
> -#define SIO_FINTEK_ID 0x1934 /* Manufacturer ID */
> +#define SIO_LD_GPIO_FINTEK 0x06 /* GPIO logical device */
> +#define SIO_LD_GPIO_NUVOTON 0x07 /* GPIO logical device */

Please indulge me and add a new line here.

> #define SIO_F71869_ID 0x0814 /* F71869 chipset ID */
> #define SIO_F71869A_ID 0x1007 /* F71869A chipset ID */
> #define SIO_F71882_ID 0x0541 /* F71882 chipset ID */
> @@ -37,7 +37,7 @@
> #define SIO_F81866_ID 0x1010 /* F81866 chipset ID */
> #define SIO_F81804_ID 0x1502 /* F81804 chipset ID, same for f81966 */
> #define SIO_F81865_ID 0x0704 /* F81865 chipset ID */
> -
> +#define SIO_NCT6116D_ID 0xD283 /* NCT6116D chipset ID */
>

... snip ...

> @@ -485,12 +516,8 @@ static int __init f7188x_find(int addr, struct f7188x_sio *sio)
> return err;
>
> err = -ENODEV;
> - devid = superio_inw(addr, SIO_MANID);
> - if (devid != SIO_FINTEK_ID) {
> - pr_debug(DRVNAME ": Not a Fintek device at 0x%08x\n", addr);
> - goto err;
> - }

Sorry for missing that at my first review. You can't remove this block
of code. This driver is poking around on the I2C bus, which is not
great. So we want to make sure as much as possible that we are speaking
to the right device.

Simon
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2022-08-12 10:45    [W:0.176 / U:0.936 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site