Messages in this thread Patch in this message | | | From | Samuel Holland <> | Subject | [PATCH] clk: sunxi-ng: d1: Limit PLL rates to stable ranges | Date | Fri, 12 Aug 2022 03:00:49 -0500 |
| |
Set the min/max rates for audio and video PLLs to keep them from going outside their documented stable ranges. Use the most restrictive of the "stable" and "actual" frequencies listed in the manual.
Signed-off-by: Samuel Holland <samuel@sholland.org> ---
drivers/clk/sunxi-ng/ccu-sun20i-d1.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/clk/sunxi-ng/ccu-sun20i-d1.c b/drivers/clk/sunxi-ng/ccu-sun20i-d1.c index 51058ba4db4d..8ef3cdeb7962 100644 --- a/drivers/clk/sunxi-ng/ccu-sun20i-d1.c +++ b/drivers/clk/sunxi-ng/ccu-sun20i-d1.c @@ -104,6 +104,8 @@ static struct ccu_nm pll_video0_4x_clk = { .lock = BIT(28), .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .min_rate = 252000000U, + .max_rate = 2400000000U, .common = { .reg = 0x040, .hw.init = CLK_HW_INIT_PARENTS_DATA("pll-video0-4x", osc24M, @@ -126,6 +128,8 @@ static struct ccu_nm pll_video1_4x_clk = { .lock = BIT(28), .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .min_rate = 252000000U, + .max_rate = 2400000000U, .common = { .reg = 0x048, .hw.init = CLK_HW_INIT_PARENTS_DATA("pll-video1-4x", osc24M, @@ -175,6 +179,8 @@ static struct ccu_nm pll_audio0_4x_clk = { .m = _SUNXI_CCU_DIV(16, 6), .sdm = _SUNXI_CCU_SDM(pll_audio0_sdm_table, BIT(24), 0x178, BIT(31)), + .min_rate = 180000000U, + .max_rate = 3000000000U, .common = { .reg = 0x078, .features = CCU_FEATURE_SIGMA_DELTA_MOD, @@ -202,6 +208,8 @@ static struct ccu_nm pll_audio1_clk = { .lock = BIT(28), .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), .m = _SUNXI_CCU_DIV(1, 1), + .min_rate = 180000000U, + .max_rate = 3000000000U, .common = { .reg = 0x080, .hw.init = CLK_HW_INIT_PARENTS_DATA("pll-audio1", osc24M, -- 2.35.1
| |