lkml.org 
[lkml]   [2022]   [Aug]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/2] arm64: meson: add support for JetHome JetHub D1p (j110)
Date
- add support for JetHome JetHub D1p (https://jethome.ru/d1p) is a home
automation controller with the following features:
- DIN Rail Mounting
- Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz
- no video out
- 1/2/4GB LPDDR4
- 8/16/32GB eMMC flash
- 1 x USB 2.0
- 1 x 10/100Mbps ethernet
- WiFi / Bluetooth Realtek 8822CS or similar IEEE 802.11a/b/g/n/ac
- TI CC2652P1 Zigbee Wireless Module with up to 20dBm output power
and Zigbee 3.0 support.
- 2 x gpio LEDS
- GPIO user Button
- 1 x 1-Wire
- 2 x RS-485
- 4 x dry contact digital GPIO inputs
- 3 x relay GPIO outputs
- DC source with a voltage of 9 to 56 V / Active POE

- unify device tree files for JetHub D1/D1p devices

Vyacheslav Bocharov (2):
arm64: dts: meson-axg: add support for JetHub D1p (j110)
dt-bindings: arm: amlogic: add bindings for Jethub D1p (j110)

.../devicetree/bindings/arm/amlogic.yaml | 1 +
arch/arm64/boot/dts/amlogic/Makefile | 2 +
.../amlogic/meson-axg-jethome-jethub-j100.dts | 338 +----------------
.../meson-axg-jethome-jethub-j110-rev-2.dts | 37 ++
.../meson-axg-jethome-jethub-j110-rev-3.dts | 27 ++
.../meson-axg-jethome-jethub-j1xx.dtsi | 351 ++++++++++++++++++
6 files changed, 422 insertions(+), 334 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi

--
2.30.2

\
 
 \ /
  Last update: 2022-08-11 12:38    [W:0.068 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site