lkml.org 
[lkml]   [2022]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 7/7] mm/swap: Cache swap migration A/D bits support
On Wed, Aug 10, 2022 at 02:37:40PM +0800, Huang, Ying wrote:
> Peter Xu <peterx@redhat.com> writes:
>
> > Introduce a variable swap_migration_ad_supported to cache whether the arch
> > supports swap migration A/D bits.
> >
> > Here one thing to mention is that SWP_MIG_TOTAL_BITS will internally
> > reference the other macro MAX_PHYSMEM_BITS, which is a function call on
> > x86 (constant on all the rest of archs).
> >
> > It's safe to reference it in swapfile_init() because when reaching here
> > we're already during initcalls level 4 so we must have initialized 5-level
> > pgtable for x86_64 (right after early_identify_cpu() finishes).
> >
> > - start_kernel
> > - setup_arch
> > - early_cpu_init
> > - get_cpu_cap --> fetch from CPUID (including X86_FEATURE_LA57)
> > - early_identify_cpu --> clear X86_FEATURE_LA57 (if early lvl5 not enabled (USE_EARLY_PGTABLE_L5))
> > - arch_call_rest_init
> > - rest_init
> > - kernel_init
> > - kernel_init_freeable
> > - do_basic_setup
> > - do_initcalls --> calls swapfile_init() (initcall level 4)
> >
> > This should slightly speed up the migration swap entry handlings.
> >
> > Signed-off-by: Peter Xu <peterx@redhat.com>
> > ---
> > include/linux/swapfile.h | 1 +
> > include/linux/swapops.h | 7 +------
> > mm/swapfile.c | 8 ++++++++
> > 3 files changed, 10 insertions(+), 6 deletions(-)
> >
> > diff --git a/include/linux/swapfile.h b/include/linux/swapfile.h
> > index 54078542134c..87ec5e2cdb02 100644
> > --- a/include/linux/swapfile.h
> > +++ b/include/linux/swapfile.h
> > @@ -9,5 +9,6 @@
> > extern struct swap_info_struct *swap_info[];
> > extern unsigned long generic_max_swapfile_size(void);
> > extern unsigned long max_swapfile_size(void);
> > +extern bool swap_migration_ad_supported;
> >
> > #endif /* _LINUX_SWAPFILE_H */
> > diff --git a/include/linux/swapops.h b/include/linux/swapops.h
> > index 0e9579b90659..e6afc77c51ad 100644
> > --- a/include/linux/swapops.h
> > +++ b/include/linux/swapops.h
> > @@ -301,13 +301,8 @@ static inline swp_entry_t make_writable_migration_entry(pgoff_t offset)
> > */
> > static inline bool migration_entry_supports_ad(void)
> > {
> > - /*
> > - * max_swapfile_size() returns the max supported swp-offset plus 1.
> > - * We can support the migration A/D bits iff the pfn swap entry has
> > - * the offset large enough to cover all of them (PFN, A & D bits).
> > - */
> > #ifdef CONFIG_SWAP
> > - return max_swapfile_size() >= (1UL << SWP_MIG_TOTAL_BITS);
> > + return swap_migration_ad_supported;
> > #else /* CONFIG_SWAP */
> > return false;
> > #endif /* CONFIG_SWAP */
> > diff --git a/mm/swapfile.c b/mm/swapfile.c
> > index 794fa37bd0c3..c49cf25f0d08 100644
> > --- a/mm/swapfile.c
> > +++ b/mm/swapfile.c
> > @@ -64,6 +64,9 @@ EXPORT_SYMBOL_GPL(nr_swap_pages);
> > long total_swap_pages;
> > static int least_priority = -1;
> > static unsigned long swapfile_maximum_size;
> > +#ifdef CONFIG_MIGRATION
> > +bool swap_migration_ad_supported;
> > +#endif /* CONFIG_MIGRATION */
> >
> > static const char Bad_file[] = "Bad swap file entry ";
> > static const char Unused_file[] = "Unused swap file entry ";
> > @@ -3685,6 +3688,11 @@ static int __init swapfile_init(void)
> >
> > swapfile_maximum_size = arch_max_swapfile_size();
> >
> > +#ifdef CONFIG_MIGRATION
> > + if (swapfile_maximum_size >= (1UL << SWP_MIG_TOTAL_BITS))
> > + swap_migration_ad_supported = true;
> > +#endif /* CONFIG_MIGRATION */
> > +
> > return 0;
> > }
> > subsys_initcall(swapfile_init);
>
> I don't think it's necessary to add a variable for such a simple
> function and it's not a super hot path. But I don't have strong
> opinions here.

Logically referencing SWP_MIG_TOTAL_BITS needs to go check
MAX_PHYSMEM_BITS, which should further go with:

# define MAX_PHYSMEM_BITS (pgtable_l5_enabled() ? 52 : 46)

Then since swapfile.c doesn't have USE_EARLY_PGTABLE_L5 defined..

#define pgtable_l5_enabled() cpu_feature_enabled(X86_FEATURE_LA57)

Then,

#define cpu_feature_enabled(bit) \
(__builtin_constant_p(bit) && DISABLED_MASK_BIT_SET(bit) ? 0 : static_cpu_has(bit))

I think LA57 shouldn't be in DISABLED_MASK_BIT_SET() at all, in our case
the relevant disable mask is:

#define DISABLED_MASK16 (DISABLE_PKU|DISABLE_OSPKE|DISABLE_LA57|DISABLE_UMIP| \
DISABLE_ENQCMD)

Here we should have:

#ifdef CONFIG_X86_5LEVEL
# define DISABLE_LA57 0
#else
# define DISABLE_LA57 (1<<(X86_FEATURE_LA57 & 31))
#endif

So DISABLE_LA57 should be 0 when 5level enabled (true in my case). Then we
really should land at static_cpu_has().

I checked up the code generated and surprisingly it's fairly fast indeed:

(after fetching swapfile_maximum_size() and put into %rax, I'll change
that into a variable soon..)
0xffffffff83932e41 <+185>: mov $0x1,%edx
0xffffffff83932e46 <+190>: shl $0x24,%rdx
0xffffffff83932e4a <+194>: xor %r8d,%r8d
0xffffffff83932e4d <+197>: cmp %rdx,%rax
0xffffffff83932e50 <+200>: jb 0xffffffff83932e59 <swapfile_init+209>
0xffffffff83932e52 <+202>: movb $0x1,0xeab897(%rip) # 0xffffffff847de6f0 <swap_migration_ad_supported>
0xffffffff83932e59 <+209>: mov %r8d,%eax

Obviously on my testing host SWP_MIG_TOTAL_BITS is directly set as $0x24
(which reflects a 4-level pgtable) but frankly I cannot tell how it did
that without checking boot cpu x86_capabilities flags.. I'm pretty sure my
kernel config has CONFIG_X86_5LEVEL=y.

It'll be great if anyone already notices why it can be optimized into a
constant, but even if so I'm not confident that'll be a constant for all
the hosts and whether static_cpu_has() will still consume some insns.

Since the change is fairly simple after previous patch, I think it'll be
nice to keep it too.

Thanks,

--
Peter Xu

\
 
 \ /
  Last update: 2022-08-10 19:10    [W:0.128 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site