lkml.org 
[lkml]   [2022]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH V3 3/6] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver
Date

On Fri 05 Aug 2022 at 16:57, Yu Tu <yu.tu@amlogic.com> wrote:

> Add the S4 PLL clock controller found in the s4 SoC family.
>
> Signed-off-by: Yu Tu <yu.tu@amlogic.com>
> ---
> drivers/clk/meson/Kconfig | 12 +
> drivers/clk/meson/Makefile | 1 +
> drivers/clk/meson/s4-pll.c | 891 +++++++++++++++++++++++++++++++++++++
> drivers/clk/meson/s4-pll.h | 88 ++++
> 4 files changed, 992 insertions(+)
> create mode 100644 drivers/clk/meson/s4-pll.c
> create mode 100644 drivers/clk/meson/s4-pll.h
>
> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
> index fc002c155bc3..f4244edc7b28 100644
> --- a/drivers/clk/meson/Kconfig
> +++ b/drivers/clk/meson/Kconfig
> @@ -115,4 +115,16 @@ config COMMON_CLK_G12A
> help
> Support for the clock controller on Amlogic S905D2, S905X2 and S905Y2
> devices, aka g12a. Say Y if you want peripherals to work.
> +
> +config COMMON_CLK_S4_PLL
> + tristate "S4 SoC PLL clock controllers support"
> + depends on ARM64
> + default y
> + select COMMON_CLK_MESON_MPLL
> + select COMMON_CLK_MESON_PLL
> + select COMMON_CLK_MESON_REGMAP
> + help
> + Support for the pll clock controller on Amlogic S805X2 and S905Y4 devices,
> + aka s4. Amlogic S805X2 and S905Y4 devices include AQ222 and AQ229.
> + Say Y if you want peripherals and CPU frequency scaling to work.

Looks like this doc is copy/paste of the peripheral controller.
This probably needs to be updated

> endmenu
> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
> index 6eca2a406ee3..376f49cc13f1 100644
> --- a/drivers/clk/meson/Makefile
> +++ b/drivers/clk/meson/Makefile
> @@ -19,3 +19,4 @@ obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
> obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
> obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
> obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o
> +obj-$(CONFIG_COMMON_CLK_S4_PLL) += s4-pll.o
> diff --git a/drivers/clk/meson/s4-pll.c b/drivers/clk/meson/s4-pll.c
> new file mode 100644
> index 000000000000..478c78b5ed46
> --- /dev/null
> +++ b/drivers/clk/meson/s4-pll.c
> @@ -0,0 +1,891 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Amlogic Meson-S4 Clock Controller Driver
> + *
> + * Copyright (c) 2021 Amlogic, inc.
> + * Author: Yu Tu <yu.tu@amlogic.com>
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +
> +#include "clk-mpll.h"
> +#include "clk-pll.h"
> +#include "clk-regmap.h"
> +#include "s4-pll.h"
> +
> +static DEFINE_SPINLOCK(meson_clk_lock);
> +
> +static struct clk_regmap s4_fixed_pll_dco = {
> + .data = &(struct meson_clk_pll_data){
> + .en = {
> + .reg_off = ANACTRL_FIXPLL_CTRL0,
> + .shift = 28,
> + .width = 1,
> + },
> + .m = {
> + .reg_off = ANACTRL_FIXPLL_CTRL0,
> + .shift = 0,
> + .width = 8,
> + },
> + .n = {
> + .reg_off = ANACTRL_FIXPLL_CTRL0,
> + .shift = 10,
> + .width = 5,
> + },
> + .frac = {
> + .reg_off = ANACTRL_FIXPLL_CTRL1,
> + .shift = 0,
> + .width = 17,
> + },
> + .l = {
> + .reg_off = ANACTRL_FIXPLL_CTRL0,
> + .shift = 31,
> + .width = 1,
> + },
> + .rst = {
> + .reg_off = ANACTRL_FIXPLL_CTRL0,
> + .shift = 29,
> + .width = 1,
> + },
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "fixed_pll_dco",
> + .ops = &meson_clk_pll_ro_ops,
> + .parent_data = (const struct clk_parent_data []) {
> + { .fw_name = "xtal", }
> + },
> + .num_parents = 1,
> + },
> +};
> +
> +static struct clk_regmap s4_fixed_pll = {
> + .data = &(struct clk_regmap_div_data){
> + .offset = ANACTRL_FIXPLL_CTRL0,
> + .shift = 16,
> + .width = 2,
> + .flags = CLK_DIVIDER_POWER_OF_TWO,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "fixed_pll",
> + .ops = &clk_regmap_divider_ro_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &s4_fixed_pll_dco.hw
> + },
> + .num_parents = 1,
> + /*
> + * This clock won't ever change at runtime so
> + * CLK_SET_RATE_PARENT is not required
> + */
> + },
> +};
> +
> +static struct clk_fixed_factor s4_fclk_div2_div = {
> + .mult = 1,
> + .div = 2,
> + .hw.init = &(struct clk_init_data){
> + .name = "fclk_div2_div",
> + .ops = &clk_fixed_factor_ops,
> + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw },
> + .num_parents = 1,
> + },
> +};
> +
> +static struct clk_regmap s4_fclk_div2 = {
> + .data = &(struct clk_regmap_gate_data){
> + .offset = ANACTRL_FIXPLL_CTRL1,
> + .bit_idx = 24,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "fclk_div2",
> + .ops = &clk_regmap_gate_ro_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &s4_fclk_div2_div.hw
> + },
> + .num_parents = 1,
> + },
> +};
> +
> +static struct clk_fixed_factor s4_fclk_div3_div = {
> + .mult = 1,
> + .div = 3,
> + .hw.init = &(struct clk_init_data){
> + .name = "fclk_div3_div",
> + .ops = &clk_fixed_factor_ops,
> + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw },
> + .num_parents = 1,
> + },
> +};
> +
> +static struct clk_regmap s4_fclk_div3 = {
> + .data = &(struct clk_regmap_gate_data){
> + .offset = ANACTRL_FIXPLL_CTRL1,
> + .bit_idx = 20,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "fclk_div3",
> + .ops = &clk_regmap_gate_ro_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &s4_fclk_div3_div.hw
> + },
> + .num_parents = 1,
> + },
> +};
> +
> +static struct clk_fixed_factor s4_fclk_div4_div = {
> + .mult = 1,
> + .div = 4,
> + .hw.init = &(struct clk_init_data){
> + .name = "fclk_div4_div",
> + .ops = &clk_fixed_factor_ops,
> + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw },
> + .num_parents = 1,
> + },
> +};
> +
> +static struct clk_regmap s4_fclk_div4 = {
> + .data = &(struct clk_regmap_gate_data){
> + .offset = ANACTRL_FIXPLL_CTRL1,
> + .bit_idx = 21,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "fclk_div4",
> + .ops = &clk_regmap_gate_ro_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &s4_fclk_div4_div.hw
> + },
> + .num_parents = 1,
> + },
> +};
> +
> +static struct clk_fixed_factor s4_fclk_div5_div = {
> + .mult = 1,
> + .div = 5,
> + .hw.init = &(struct clk_init_data){
> + .name = "fclk_div5_div",
> + .ops = &clk_fixed_factor_ops,
> + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw },
> + .num_parents = 1,
> + },
> +};
> +
> +static struct clk_regmap s4_fclk_div5 = {
> + .data = &(struct clk_regmap_gate_data){
> + .offset = ANACTRL_FIXPLL_CTRL1,
> + .bit_idx = 22,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "fclk_div5",
> + .ops = &clk_regmap_gate_ro_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &s4_fclk_div5_div.hw
> + },
> + .num_parents = 1,
> + },
> +};
> +
> +static struct clk_fixed_factor s4_fclk_div7_div = {
> + .mult = 1,
> + .div = 7,
> + .hw.init = &(struct clk_init_data){
> + .name = "fclk_div7_div",
> + .ops = &clk_fixed_factor_ops,
> + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw },
> + .num_parents = 1,
> + },
> +};
> +
> +static struct clk_regmap s4_fclk_div7 = {
> + .data = &(struct clk_regmap_gate_data){
> + .offset = ANACTRL_FIXPLL_CTRL1,
> + .bit_idx = 23,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "fclk_div7",
> + .ops = &clk_regmap_gate_ro_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &s4_fclk_div7_div.hw
> + },
> + .num_parents = 1,
> + },
> +};
> +
> +static struct clk_fixed_factor s4_fclk_div2p5_div = {
> + .mult = 2,
> + .div = 5,
> + .hw.init = &(struct clk_init_data){
> + .name = "fclk_div2p5_div",
> + .ops = &clk_fixed_factor_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &s4_fixed_pll.hw
> + },
> + .num_parents = 1,
> + },
> +};
> +
> +static struct clk_regmap s4_fclk_div2p5 = {
> + .data = &(struct clk_regmap_gate_data){
> + .offset = ANACTRL_FIXPLL_CTRL1,
> + .bit_idx = 25,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "fclk_div2p5",
> + .ops = &clk_regmap_gate_ro_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &s4_fclk_div2p5_div.hw
> + },
> + .num_parents = 1,
> + },
> +};
> +
> +static const struct pll_mult_range s4_gp0_pll_mult_range = {
> + .min = 125,
> + .max = 250,
> +};
> +
> +/*
> + * Internal gp0 pll emulation configuration parameters
> + */
> +static const struct reg_sequence s4_gp0_init_regs[] = {
> + { .reg = ANACTRL_GP0PLL_CTRL1, .def = 0x00000000 },
> + { .reg = ANACTRL_GP0PLL_CTRL2, .def = 0x00000000 },
> + { .reg = ANACTRL_GP0PLL_CTRL3, .def = 0x48681c00 },
> + { .reg = ANACTRL_GP0PLL_CTRL4, .def = 0x88770290 },
> + { .reg = ANACTRL_GP0PLL_CTRL5, .def = 0x39272000 },
> + { .reg = ANACTRL_GP0PLL_CTRL6, .def = 0x56540000 }
> +};
> +
> +static struct clk_regmap s4_gp0_pll_dco = {
> + .data = &(struct meson_clk_pll_data){
> + .en = {
> + .reg_off = ANACTRL_GP0PLL_CTRL0,
> + .shift = 28,
> + .width = 1,
> + },
> + .m = {
> + .reg_off = ANACTRL_GP0PLL_CTRL0,
> + .shift = 0,
> + .width = 8,
> + },
> + .n = {
> + .reg_off = ANACTRL_GP0PLL_CTRL0,
> + .shift = 10,
> + .width = 5,
> + },
> + .frac = {
> + .reg_off = ANACTRL_GP0PLL_CTRL1,
> + .shift = 0,
> + .width = 17,
> + },
> + .l = {
> + .reg_off = ANACTRL_GP0PLL_CTRL0,
> + .shift = 31,
> + .width = 1,
> + },
> + .rst = {
> + .reg_off = ANACTRL_GP0PLL_CTRL0,
> + .shift = 29,
> + .width = 1,
> + },
> + .range = &s4_gp0_pll_mult_range,
> + .init_regs = s4_gp0_init_regs,
> + .init_count = ARRAY_SIZE(s4_gp0_init_regs),
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "gp0_pll_dco",
> + .ops = &meson_clk_pll_ops,
> + .parent_data = (const struct clk_parent_data []) {
> + { .fw_name = "xtal", }
> + },
> + .num_parents = 1,
> + },
> +};
> +
> +static struct clk_regmap s4_gp0_pll = {
> + .data = &(struct clk_regmap_div_data){
> + .offset = ANACTRL_GP0PLL_CTRL0,
> + .shift = 16,
> + .width = 3,
> + .flags = (CLK_DIVIDER_POWER_OF_TWO |
> + CLK_DIVIDER_ROUND_CLOSEST),
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "gp0_pll",
> + .ops = &clk_regmap_divider_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &s4_gp0_pll_dco.hw
> + },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +/*
> + * Internal hifi pll emulation configuration parameters
> + */
> +static const struct reg_sequence s4_hifi_init_regs[] = {
> + { .reg = ANACTRL_HIFIPLL_CTRL1, .def = 0x00010e56 },
> + { .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00000000 },
> + { .reg = ANACTRL_HIFIPLL_CTRL3, .def = 0x6a285c00 },
> + { .reg = ANACTRL_HIFIPLL_CTRL4, .def = 0x65771290 },
> + { .reg = ANACTRL_HIFIPLL_CTRL5, .def = 0x39272000 },
> + { .reg = ANACTRL_HIFIPLL_CTRL6, .def = 0x56540000 }
> +};
> +
> +static struct clk_regmap s4_hifi_pll_dco = {
> + .data = &(struct meson_clk_pll_data){
> + .en = {
> + .reg_off = ANACTRL_HIFIPLL_CTRL0,
> + .shift = 28,
> + .width = 1,
> + },
> + .m = {
> + .reg_off = ANACTRL_HIFIPLL_CTRL0,
> + .shift = 0,
> + .width = 8,
> + },
> + .n = {
> + .reg_off = ANACTRL_HIFIPLL_CTRL0,
> + .shift = 10,
> + .width = 5,
> + },
> + .frac = {
> + .reg_off = ANACTRL_HIFIPLL_CTRL1,
> + .shift = 0,
> + .width = 17,
> + },
> + .l = {
> + .reg_off = ANACTRL_HIFIPLL_CTRL0,
> + .shift = 31,
> + .width = 1,
> + },
> + .rst = {
> + .reg_off = ANACTRL_HIFIPLL_CTRL0,
> + .shift = 29,
> + .width = 1,
> + },
> + .range = &s4_gp0_pll_mult_range,
> + .init_regs = s4_hifi_init_regs,
> + .init_count = ARRAY_SIZE(s4_hifi_init_regs),
> + .flags = CLK_MESON_PLL_ROUND_CLOSEST,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "hifi_pll_dco",
> + .ops = &meson_clk_pll_ops,
> + .parent_data = (const struct clk_parent_data []) {
> + { .fw_name = "xtal", }
> + },
> + .num_parents = 1,
> + },
> +};
> +
> +static struct clk_regmap s4_hifi_pll = {
> + .data = &(struct clk_regmap_div_data){
> + .offset = ANACTRL_HIFIPLL_CTRL0,
> + .shift = 16,
> + .width = 2,
> + .flags = (CLK_DIVIDER_POWER_OF_TWO |
> + CLK_DIVIDER_ROUND_CLOSEST),
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "hifi_pll",
> + .ops = &clk_regmap_divider_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &s4_hifi_pll_dco.hw
> + },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +static struct clk_regmap s4_hdmi_pll_dco = {
> + .data = &(struct meson_clk_pll_data){
> + .en = {
> + .reg_off = ANACTRL_HDMIPLL_CTRL0,
> + .shift = 28,
> + .width = 1,
> + },
> + .m = {
> + .reg_off = ANACTRL_HDMIPLL_CTRL0,
> + .shift = 0,
> + .width = 8,
> + },
> + .n = {
> + .reg_off = ANACTRL_HDMIPLL_CTRL0,
> + .shift = 10,
> + .width = 5,
> + },
> + .frac = {
> + .reg_off = ANACTRL_HDMIPLL_CTRL1,
> + .shift = 0,
> + .width = 17,
> + },
> + .l = {
> + .reg_off = ANACTRL_HDMIPLL_CTRL0,
> + .shift = 31,
> + .width = 1,
> + },
> + .rst = {
> + .reg_off = ANACTRL_HDMIPLL_CTRL0,
> + .shift = 29,
> + .width = 1,
> + },
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "hdmi_pll_dco",
> + .ops = &meson_clk_pll_ro_ops,
> + .parent_data = (const struct clk_parent_data []) {
> + { .fw_name = "xtal", }
> + },
> + .num_parents = 1,
> + /*
> + * Display directly handle hdmi pll registers ATM, we need
> + * NOCACHE to keep our view of the clock as accurate as
> + * possible
> + */

Is it really ?

Given that HDMI support for the s4 is there yet, the
addresses have changes and the region is no longer a syscon, it is time
for the HDMI driver to get fixed.

> + .flags = CLK_GET_RATE_NOCACHE,
> + },
> +};
> +
> +static struct clk_regmap s4_hdmi_pll_od = {
> + .data = &(struct clk_regmap_div_data){
> + .offset = ANACTRL_HDMIPLL_CTRL0,
> + .shift = 16,
> + .width = 4,
> + .flags = CLK_DIVIDER_POWER_OF_TWO,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "hdmi_pll_od",
> + .ops = &clk_regmap_divider_ro_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &s4_hdmi_pll_dco.hw
> + },
> + .num_parents = 1,
> + /*
> + * Display directly handle hdmi pll registers ATM, we need
> + * NOCACHE to keep our view of the clock as accurate as
> + * possible
> + */
> + .flags = CLK_GET_RATE_NOCACHE | CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +static struct clk_regmap s4_hdmi_pll = {
> + .data = &(struct clk_regmap_div_data){
> + .offset = ANACTRL_HDMIPLL_CTRL0,
> + .shift = 20,
> + .width = 2,
> + .flags = CLK_DIVIDER_POWER_OF_TWO,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "hdmi_pll",
> + .ops = &clk_regmap_divider_ro_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &s4_hdmi_pll_od.hw
> + },
> + .num_parents = 1,
> + /*
> + * Display directly handle hdmi pll registers ATM, we need
> + * NOCACHE to keep our view of the clock as accurate as
> + * possible
> + */
> + .flags = CLK_GET_RATE_NOCACHE | CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +static struct clk_fixed_factor s4_mpll_50m_div = {
> + .mult = 1,
> + .div = 80,
> + .hw.init = &(struct clk_init_data){
> + .name = "mpll_50m_div",
> + .ops = &clk_fixed_factor_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &s4_fixed_pll_dco.hw
> + },
> + .num_parents = 1,
> + },
> +};
> +
> +static struct clk_regmap s4_mpll_50m = {
> + .data = &(struct clk_regmap_mux_data){
> + .offset = ANACTRL_FIXPLL_CTRL3,
> + .mask = 0x1,
> + .shift = 5,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "mpll_50m",
> + .ops = &clk_regmap_mux_ro_ops,
> + .parent_data = (const struct clk_parent_data []) {
> + { .fw_name = "xtal", },
> + { .hw = &s4_mpll_50m_div.hw },
> + },
> + .num_parents = 2,
> + },
> +};
> +
> +static struct clk_fixed_factor s4_mpll_prediv = {
> + .mult = 1,
> + .div = 2,
> + .hw.init = &(struct clk_init_data){
> + .name = "mpll_prediv",
> + .ops = &clk_fixed_factor_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &s4_fixed_pll_dco.hw
> + },
> + .num_parents = 1,
> + },
> +};
> +
> +static const struct reg_sequence s4_mpll0_init_regs[] = {
> + { .reg = ANACTRL_MPLL_CTRL2, .def = 0x40000033 }
> +};
> +
> +static struct clk_regmap s4_mpll0_div = {
> + .data = &(struct meson_clk_mpll_data){
> + .sdm = {
> + .reg_off = ANACTRL_MPLL_CTRL1,
> + .shift = 0,
> + .width = 14,
> + },
> + .sdm_en = {
> + .reg_off = ANACTRL_MPLL_CTRL1,
> + .shift = 30,
> + .width = 1,
> + },
> + .n2 = {
> + .reg_off = ANACTRL_MPLL_CTRL1,
> + .shift = 20,
> + .width = 9,
> + },
> + .ssen = {
> + .reg_off = ANACTRL_MPLL_CTRL1,
> + .shift = 29,
> + .width = 1,
> + },
> + .lock = &meson_clk_lock,
> + .init_regs = s4_mpll0_init_regs,
> + .init_count = ARRAY_SIZE(s4_mpll0_init_regs),
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "mpll0_div",
> + .ops = &meson_clk_mpll_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &s4_mpll_prediv.hw
> + },
> + .num_parents = 1,
> + },
> +};
> +
> +static struct clk_regmap s4_mpll0 = {
> + .data = &(struct clk_regmap_gate_data){
> + .offset = ANACTRL_MPLL_CTRL1,
> + .bit_idx = 31,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "mpll0",
> + .ops = &clk_regmap_gate_ops,
> + .parent_hws = (const struct clk_hw *[]) { &s4_mpll0_div.hw },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +static const struct reg_sequence s4_mpll1_init_regs[] = {
> + { .reg = ANACTRL_MPLL_CTRL4, .def = 0x40000033 }
> +};
> +
> +static struct clk_regmap s4_mpll1_div = {
> + .data = &(struct meson_clk_mpll_data){
> + .sdm = {
> + .reg_off = ANACTRL_MPLL_CTRL3,
> + .shift = 0,
> + .width = 14,
> + },
> + .sdm_en = {
> + .reg_off = ANACTRL_MPLL_CTRL3,
> + .shift = 30,
> + .width = 1,
> + },
> + .n2 = {
> + .reg_off = ANACTRL_MPLL_CTRL3,
> + .shift = 20,
> + .width = 9,
> + },
> + .ssen = {
> + .reg_off = ANACTRL_MPLL_CTRL3,
> + .shift = 29,
> + .width = 1,
> + },
> + .lock = &meson_clk_lock,
> + .init_regs = s4_mpll1_init_regs,
> + .init_count = ARRAY_SIZE(s4_mpll1_init_regs),
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "mpll1_div",
> + .ops = &meson_clk_mpll_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &s4_mpll_prediv.hw
> + },
> + .num_parents = 1,
> + },
> +};
> +
> +static struct clk_regmap s4_mpll1 = {
> + .data = &(struct clk_regmap_gate_data){
> + .offset = ANACTRL_MPLL_CTRL3,
> + .bit_idx = 31,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "mpll1",
> + .ops = &clk_regmap_gate_ops,
> + .parent_hws = (const struct clk_hw *[]) { &s4_mpll1_div.hw },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +static const struct reg_sequence s4_mpll2_init_regs[] = {
> + { .reg = ANACTRL_MPLL_CTRL6, .def = 0x40000033 }
> +};
> +
> +static struct clk_regmap s4_mpll2_div = {
> + .data = &(struct meson_clk_mpll_data){
> + .sdm = {
> + .reg_off = ANACTRL_MPLL_CTRL5,
> + .shift = 0,
> + .width = 14,
> + },
> + .sdm_en = {
> + .reg_off = ANACTRL_MPLL_CTRL5,
> + .shift = 30,
> + .width = 1,
> + },
> + .n2 = {
> + .reg_off = ANACTRL_MPLL_CTRL5,
> + .shift = 20,
> + .width = 9,
> + },
> + .ssen = {
> + .reg_off = ANACTRL_MPLL_CTRL5,
> + .shift = 29,
> + .width = 1,
> + },
> + .lock = &meson_clk_lock,
> + .init_regs = s4_mpll2_init_regs,
> + .init_count = ARRAY_SIZE(s4_mpll2_init_regs),
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "mpll2_div",
> + .ops = &meson_clk_mpll_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &s4_mpll_prediv.hw
> + },
> + .num_parents = 1,
> + },
> +};
> +
> +static struct clk_regmap s4_mpll2 = {
> + .data = &(struct clk_regmap_gate_data){
> + .offset = ANACTRL_MPLL_CTRL5,
> + .bit_idx = 31,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "mpll2",
> + .ops = &clk_regmap_gate_ops,
> + .parent_hws = (const struct clk_hw *[]) { &s4_mpll2_div.hw },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +static const struct reg_sequence s4_mpll3_init_regs[] = {
> + { .reg = ANACTRL_MPLL_CTRL8, .def = 0x40000033 }
> +};
> +
> +static struct clk_regmap s4_mpll3_div = {
> + .data = &(struct meson_clk_mpll_data){
> + .sdm = {
> + .reg_off = ANACTRL_MPLL_CTRL7,
> + .shift = 0,
> + .width = 14,
> + },
> + .sdm_en = {
> + .reg_off = ANACTRL_MPLL_CTRL7,
> + .shift = 30,
> + .width = 1,
> + },
> + .n2 = {
> + .reg_off = ANACTRL_MPLL_CTRL7,
> + .shift = 20,
> + .width = 9,
> + },
> + .ssen = {
> + .reg_off = ANACTRL_MPLL_CTRL7,
> + .shift = 29,
> + .width = 1,
> + },
> + .lock = &meson_clk_lock,
> + .init_regs = s4_mpll3_init_regs,
> + .init_count = ARRAY_SIZE(s4_mpll3_init_regs),
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "mpll3_div",
> + .ops = &meson_clk_mpll_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &s4_mpll_prediv.hw
> + },
> + .num_parents = 1,
> + },
> +};
> +
> +static struct clk_regmap s4_mpll3 = {
> + .data = &(struct clk_regmap_gate_data){
> + .offset = ANACTRL_MPLL_CTRL7,
> + .bit_idx = 31,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "mpll3",
> + .ops = &clk_regmap_gate_ops,
> + .parent_hws = (const struct clk_hw *[]) { &s4_mpll3_div.hw },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +/* Array of all clocks provided by this provider */
> +static struct clk_hw_onecell_data s4_pll_hw_onecell_data = {
> + .hws = {
> + [CLKID_FIXED_PLL_DCO] = &s4_fixed_pll_dco.hw,
> + [CLKID_FIXED_PLL] = &s4_fixed_pll.hw,
> + [CLKID_FCLK_DIV2_DIV] = &s4_fclk_div2_div.hw,
> + [CLKID_FCLK_DIV2] = &s4_fclk_div2.hw,
> + [CLKID_FCLK_DIV3_DIV] = &s4_fclk_div3_div.hw,
> + [CLKID_FCLK_DIV3] = &s4_fclk_div3.hw,
> + [CLKID_FCLK_DIV4_DIV] = &s4_fclk_div4_div.hw,
> + [CLKID_FCLK_DIV4] = &s4_fclk_div4.hw,
> + [CLKID_FCLK_DIV5_DIV] = &s4_fclk_div5_div.hw,
> + [CLKID_FCLK_DIV5] = &s4_fclk_div5.hw,
> + [CLKID_FCLK_DIV7_DIV] = &s4_fclk_div7_div.hw,
> + [CLKID_FCLK_DIV7] = &s4_fclk_div7.hw,
> + [CLKID_FCLK_DIV2P5_DIV] = &s4_fclk_div2p5_div.hw,
> + [CLKID_FCLK_DIV2P5] = &s4_fclk_div2p5.hw,
> + [CLKID_GP0_PLL_DCO] = &s4_gp0_pll_dco.hw,
> + [CLKID_GP0_PLL] = &s4_gp0_pll.hw,
> + [CLKID_HIFI_PLL_DCO] = &s4_hifi_pll_dco.hw,
> + [CLKID_HIFI_PLL] = &s4_hifi_pll.hw,
> + [CLKID_HDMI_PLL_DCO] = &s4_hdmi_pll_dco.hw,
> + [CLKID_HDMI_PLL_OD] = &s4_hdmi_pll_od.hw,
> + [CLKID_HDMI_PLL] = &s4_hdmi_pll.hw,
> + [CLKID_MPLL_50M_DIV] = &s4_mpll_50m_div.hw,
> + [CLKID_MPLL_50M] = &s4_mpll_50m.hw,
> + [CLKID_MPLL_PREDIV] = &s4_mpll_prediv.hw,
> + [CLKID_MPLL0_DIV] = &s4_mpll0_div.hw,
> + [CLKID_MPLL0] = &s4_mpll0.hw,
> + [CLKID_MPLL1_DIV] = &s4_mpll1_div.hw,
> + [CLKID_MPLL1] = &s4_mpll1.hw,
> + [CLKID_MPLL2_DIV] = &s4_mpll2_div.hw,
> + [CLKID_MPLL2] = &s4_mpll2.hw,
> + [CLKID_MPLL3_DIV] = &s4_mpll3_div.hw,
> + [CLKID_MPLL3] = &s4_mpll3.hw,
> +
> + [NR_PLL_CLKS] = NULL
> + },
> + .num = NR_PLL_CLKS,
> +};
> +
> +static struct clk_regmap *const s4_pll_clk_regmaps[] = {
> + &s4_fixed_pll_dco,
> + &s4_fixed_pll,
> + &s4_fclk_div2,
> + &s4_fclk_div3,
> + &s4_fclk_div4,
> + &s4_fclk_div5,
> + &s4_fclk_div7,
> + &s4_fclk_div2p5,
> + &s4_gp0_pll_dco,
> + &s4_gp0_pll,
> + &s4_hifi_pll_dco,
> + &s4_hifi_pll,
> + &s4_hdmi_pll_dco,
> + &s4_hdmi_pll_od,
> + &s4_hdmi_pll,
> + &s4_mpll_50m,
> + &s4_mpll0_div,
> + &s4_mpll0,
> + &s4_mpll1_div,
> + &s4_mpll1,
> + &s4_mpll2_div,
> + &s4_mpll2,
> + &s4_mpll3_div,
> + &s4_mpll3,
> +};
> +
> +static const struct reg_sequence s4_init_regs[] = {
> + { .reg = ANACTRL_MPLL_CTRL0, .def = 0x00000543 },
> +};
> +
> +static struct regmap_config clkc_regmap_config = {
> + .reg_bits = 32,
> + .val_bits = 32,
> + .reg_stride = 4,
> +};
> +
> +static int meson_s4_pll_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct regmap *regmap;
> + void __iomem *base;
> + int ret, i;
> +
> + base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + regmap = devm_regmap_init_mmio(dev, base, &clkc_regmap_config);
> + if (IS_ERR(regmap))
> + return PTR_ERR(regmap);
> +
> + ret = regmap_multi_reg_write(regmap, s4_init_regs, ARRAY_SIZE(s4_init_regs));
> + if (ret) {
> + dev_err(dev, "Failed to init registers\n");
> + return ret;
> + }
> +
> + /* Populate regmap for the regmap backed clocks */
> + for (i = 0; i < ARRAY_SIZE(s4_pll_clk_regmaps); i++)
> + s4_pll_clk_regmaps[i]->map = regmap;
> +
> + for (i = 0; i < s4_pll_hw_onecell_data.num; i++) {
> + /* array might be sparse */
> + if (!s4_pll_hw_onecell_data.hws[i])
> + continue;
> +
> + ret = devm_clk_hw_register(dev, s4_pll_hw_onecell_data.hws[i]);
> + if (ret) {
> + dev_err(dev, "Clock registration failed\n");
> + return ret;
> + }
> + }
> +
> + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
> + &s4_pll_hw_onecell_data);
> +}
> +
> +static const struct of_device_id clkc_match_table[] = {
> + {
> + .compatible = "amlogic,s4-pll-clkc",
> + },
> + {}
> +};
> +
> +static struct platform_driver s4_driver = {
> + .probe = meson_s4_pll_probe,
> + .driver = {
> + .name = "s4-pll-clkc",
> + .of_match_table = clkc_match_table,
> + },
> +};
> +
> +module_platform_driver(s4_driver);
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/clk/meson/s4-pll.h b/drivers/clk/meson/s4-pll.h
> new file mode 100644
> index 000000000000..41dc6de978c1
> --- /dev/null
> +++ b/drivers/clk/meson/s4-pll.h
> @@ -0,0 +1,88 @@
> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
> +/*
> + * Copyright (c) 2021 Amlogic, inc.
> + * Author: Yu Tu <yu.tu@amlogic.com>
> + */
> +
> +#ifndef __MESON_S4_PLL_H__
> +#define __MESON_S4_PLL_H__
> +
> +/* ANA_CTRL - Registers
> + * REG_BASE: REGISTER_BASE_ADDR = 0xfe008000
> + */
> +#define ANACTRL_FIXPLL_CTRL0 (0x0010 << 2)

I already commented on the "<< 2" . Remove them please.

> +#define ANACTRL_FIXPLL_CTRL1 (0x0011 << 2)
> +#define ANACTRL_FIXPLL_CTRL2 (0x0012 << 2)
> +#define ANACTRL_FIXPLL_CTRL3 (0x0013 << 2)
> +#define ANACTRL_FIXPLL_CTRL4 (0x0014 << 2)
> +#define ANACTRL_FIXPLL_CTRL5 (0x0015 << 2)
> +#define ANACTRL_FIXPLL_CTRL6 (0x0016 << 2)
> +#define ANACTRL_FIXPLL_STS (0x0017 << 2)
> +#define ANACTRL_GP0PLL_CTRL0 (0x0020 << 2)
> +#define ANACTRL_GP0PLL_CTRL1 (0x0021 << 2)
> +#define ANACTRL_GP0PLL_CTRL2 (0x0022 << 2)
> +#define ANACTRL_GP0PLL_CTRL3 (0x0023 << 2)
> +#define ANACTRL_GP0PLL_CTRL4 (0x0024 << 2)
> +#define ANACTRL_GP0PLL_CTRL5 (0x0025 << 2)
> +#define ANACTRL_GP0PLL_CTRL6 (0x0026 << 2)
> +#define ANACTRL_GP0PLL_STS (0x0027 << 2)
> +#define ANACTRL_HIFIPLL_CTRL0 (0x0040 << 2)
> +#define ANACTRL_HIFIPLL_CTRL1 (0x0041 << 2)
> +#define ANACTRL_HIFIPLL_CTRL2 (0x0042 << 2)
> +#define ANACTRL_HIFIPLL_CTRL3 (0x0043 << 2)
> +#define ANACTRL_HIFIPLL_CTRL4 (0x0044 << 2)
> +#define ANACTRL_HIFIPLL_CTRL5 (0x0045 << 2)
> +#define ANACTRL_HIFIPLL_CTRL6 (0x0046 << 2)
> +#define ANACTRL_HIFIPLL_STS (0x0047 << 2)
> +#define ANACTRL_MPLL_CTRL0 (0x0060 << 2)
> +#define ANACTRL_MPLL_CTRL1 (0x0061 << 2)
> +#define ANACTRL_MPLL_CTRL2 (0x0062 << 2)
> +#define ANACTRL_MPLL_CTRL3 (0x0063 << 2)
> +#define ANACTRL_MPLL_CTRL4 (0x0064 << 2)
> +#define ANACTRL_MPLL_CTRL5 (0x0065 << 2)
> +#define ANACTRL_MPLL_CTRL6 (0x0066 << 2)
> +#define ANACTRL_MPLL_CTRL7 (0x0067 << 2)
> +#define ANACTRL_MPLL_CTRL8 (0x0068 << 2)
> +#define ANACTRL_MPLL_STS (0x0069 << 2)
> +#define ANACTRL_HDMIPLL_CTRL0 (0x0070 << 2)
> +#define ANACTRL_HDMIPLL_CTRL1 (0x0071 << 2)
> +#define ANACTRL_HDMIPLL_CTRL2 (0x0072 << 2)
> +#define ANACTRL_HDMIPLL_CTRL3 (0x0073 << 2)
> +#define ANACTRL_HDMIPLL_CTRL4 (0x0074 << 2)
> +#define ANACTRL_HDMIPLL_CTRL5 (0x0075 << 2)
> +#define ANACTRL_HDMIPLL_CTRL6 (0x0076 << 2)
> +#define ANACTRL_HDMIPLL_STS (0x0077 << 2)
> +#define ANACTRL_HDMIPLL_VLOCK (0x0079 << 2)
> +
> +/*
> + * CLKID index values
> + *
> + * These indices are entirely contrived and do not map onto the hardware.
> + * It has now been decided to expose everything by default in the DT header:
> + * include/dt-bindings/clock/axg-clkc.h. Only the clocks ids we don't want
> + * to expose, such as the internal muxes and dividers of composite clocks,
> + * will remain defined here.
> + */
> +#define CLKID_FIXED_PLL_DCO 0
> +#define CLKID_FCLK_DIV2_DIV 2
> +#define CLKID_FCLK_DIV3_DIV 4
> +#define CLKID_FCLK_DIV4_DIV 6
> +#define CLKID_FCLK_DIV5_DIV 8
> +#define CLKID_FCLK_DIV7_DIV 10
> +#define CLKID_FCLK_DIV2P5_DIV 12
> +#define CLKID_GP0_PLL_DCO 14
> +#define CLKID_HIFI_PLL_DCO 16
> +#define CLKID_HDMI_PLL_DCO 18
> +#define CLKID_HDMI_PLL_OD 19
> +#define CLKID_MPLL_50M_DIV 21
> +#define CLKID_MPLL_PREDIV 23
> +#define CLKID_MPLL0_DIV 24
> +#define CLKID_MPLL1_DIV 26
> +#define CLKID_MPLL2_DIV 28
> +#define CLKID_MPLL3_DIV 30
> +
> +#define NR_PLL_CLKS 32
> +/* include the CLKIDs that have been made part of the DT binding */
> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h>
> +
> +#endif /* __MESON_S4_PLL_H__ */

\
 
 \ /
  Last update: 2022-08-10 15:56    [W:0.264 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site