lkml.org 
[lkml]   [2022]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 4/5] firmware: qcom: scm: Add wait-queue helper functions
Hey Rajendra,

Sorry for the delay in response. Needed to clarify with internal team members
on these questions before responding.

On Aug 02 2022 17:07, Rajendra Nayak wrote:
>
> On 7/23/2022 4:07 AM, Guru Das Srinagesh wrote:
> >When the firmware (FW) supports multiple requests per VM, and the VM
> >also supports it via the `allow-multi-call` device tree flag, the
> >floodgates are thrown open for them to all reach the firmware at the
> >same time.

[...]

> > 2) SCM_WAITQ_WAKE:
> >
> > When an SCM call receives this return value instead of success
> > or error, FW wishes to signal HLOS to wake up a (different)
> > previously sleeping call.
> >
> > FW tells HLOS which call to wake up via the additional return
> > values `wq_ctx`, `smc_call_ctx` and `flags`. The first two have
> > already been explained above.
> >
> > `flags` can be either WAKE_ONE or WAKE_ALL. Meaning, wake either
> > one, or all, of the SCM calls that HLOS is associating with the
> > given `wq_ctx`.
> >
> >A sleeping SCM call can be woken up by either an interrupt that FW
> >raises, or via a SCM_WAITQ_WAKE return value for a new SCM call.
>
> Do you know why the FW was not designed to always use an interrupt?
> That would have made the handling of this in kernel a lot less complicated.

Because:

1. Our firmware in TrustZone cannot raise interrupts on its own - it needs the
hypervisor to do that.

2. Thus, in platforms where there is no hypervisor, there is no interrupt
possible - only SMC_WAITQ_WAKE.

Therefore, relying only on an interrupt would render the driver unable to
support platforms without a hypervisor, which we didn't want to do.

> >The handshake mechanism that HLOS uses to talk to FW about wait-queue
> >operations involves three new SMC calls. These are:
> >

[...]

> >+static void scm_irq_work(struct work_struct *work)
> >+{
> >+ int ret;
> >+ u32 wq_ctx, flags, more_pending = 0;
> >+ struct completion *wq_to_wake;
> >+ struct qcom_scm_waitq *w = container_of(work, struct qcom_scm_waitq, scm_irq_work);
> >+ struct qcom_scm *scm = container_of(w, struct qcom_scm, waitq);
> >+
> >+ do {
> >+ ret = scm_get_wq_ctx(&wq_ctx, &flags, &more_pending);
> >+ if (ret) {
> >+ pr_err("GET_WQ_CTX SMC call failed: %d\n", ret);
> >+ return;
> >+ }
> >+
> >+ wq_to_wake = qcom_scm_lookup_wq(scm, wq_ctx);
> >+ if (IS_ERR_OR_NULL(wq_to_wake)) {
> >+ pr_err("No waitqueue found for wq_ctx %d: %ld\n",
> >+ wq_ctx, PTR_ERR(wq_to_wake));
> >+ return;
>
> What happens if at this point 'more_pending' was true? will the FW raise
> another interrupt?

Hmm. At this point, the interrupt handler is early-exiting without waking up a
sleeping call via the flag_handler() because firmware has goofed up and given
it an invalid wq_ctx. We have bigger problems than `more_pending` being true.

>
> >+ }
> >+
> >+ scm_waitq_flag_handler(wq_to_wake, flags);
> >+ } while (more_pending);
> >+}

Thank you.

Guru Das.

\
 
 \ /
  Last update: 2022-08-11 05:03    [W:0.062 / U:0.732 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site