lkml.org 
[lkml]   [2022]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/3] units: complement the set of Hz units
Date
During msa311 accel IIO driver development

https://lore.kernel.org/linux-iio/20220616104211.9257-1-ddrokosov@sberdevices.ru/

Andy requested to use proper units in the hz->ms calculation. Current
units.h header doesn't have milli, micro and nano HZ coefficients, so
some drivers (in the IIO subsystem) implement their own copies for that.

The current patchset resolves such a problem and intoduces general
MILLIHZ_PER_HZ, MICROHZ_PER_HZ and NANOHZ_PER_HZ definitions in the units.h,
and fixes all drivers which duplicate these units.

Changes:
* v2->v3:
- changed UHZ_PER_HZ to MICROHZ_PER_HZ and NHZ_PER_HZ to
NANOHZ_PER_HZ to save name consistency for all new HZ units

* v1->v2:
- changed MHZ_PER_HZ to a different name as Andy suggested
(suppose MILLIHZ_PER_HZ is good enough)

Dmitry Rokosov (3):
units: complement the set of Hz units
iio: accel: adxl345: use HZ macro from units.h
iio: common: scmi_sensors: use HZ macro from units.h

drivers/iio/accel/adxl345_core.c | 7 ++++---
drivers/iio/common/scmi_sensors/scmi_iio.c | 8 ++++----
include/linux/units.h | 3 +++
3 files changed, 11 insertions(+), 7 deletions(-)

--
2.36.0

\
 
 \ /
  Last update: 2022-08-01 16:39    [W:0.960 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site