lkml.org 
[lkml]   [2022]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.18 39/88] scsi: mpt3sas: Stop fw fault watchdog work item during system shutdown
Date
From: David Jeffery <djeffery@redhat.com>

commit 0fde22c5420ed258ee538a760291c2f3935f6a01 upstream.

During system shutdown or reboot, mpt3sas will reset the firmware back to
ready state. However, the driver leaves running a watchdog work item
intended to keep the firmware in operational state. This causes a second,
unneeded reset on shutdown and moves the firmware back to operational
instead of in ready state as intended. And if the mpt3sas_fwfault_debug
module parameter is set, this extra reset also panics the system.

mpt3sas's scsih_shutdown needs to stop the watchdog before resetting the
firmware back to ready state.

Link: https://lore.kernel.org/r/20220722142448.6289-1-djeffery@redhat.com
Fixes: fae21608c31c ("scsi: mpt3sas: Transition IOC to Ready state during shutdown")
Tested-by: Laurence Oberman <loberman@redhat.com>
Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 1 +
1 file changed, 1 insertion(+)

--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -11386,6 +11386,7 @@ scsih_shutdown(struct pci_dev *pdev)
_scsih_ir_shutdown(ioc);
_scsih_nvme_shutdown(ioc);
mpt3sas_base_mask_interrupts(ioc);
+ mpt3sas_base_stop_watchdog(ioc);
ioc->shost_recovery = 1;
mpt3sas_base_make_ioc_ready(ioc, SOFT_RESET);
ioc->shost_recovery = 0;

\
 
 \ /
  Last update: 2022-08-01 14:14    [W:0.418 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site